Ji553r Posted July 23, 2010 Author Report Share Posted July 23, 2010 little update. through the week i just did some sanding, a little fine tuning. today came and got off a wee early so i got it glued so ima go pick up some more 10 awg speaker wire then by the time i get back get some screwing done all thats left is 1 run of 1/0 to the back battery and hooking it up then to the amp and thats it! gotta add some weight up top! I don't fuck around. I go from zero to I hope you die in less than 2 posts build log http://www.stevemeadedesigns.com/board/topic/104524-new-subs-coming-sundown-3500d-arc-audio-cable-lacing-crescendo/ Link to comment Share on other sites More sharing options...
Ji553r Posted August 6, 2010 Author Report Share Posted August 6, 2010 ok i really need some help here. i tried crunching numbers and using a few different box calculators. i originally designed box with REs L port calculator which it said i would end up with a 4.5 cube box tuned to 34 hz...well i measured evrything a second time and im ending up with 38 x 18 x 19 with .75 wood so 7.52 cubes gross with 4.25 x 16.5 port for 70.125 sq inch port which equals just over 9 sq inch port per cu foot and with a length of 25.5 inches i came up with a tunage of 27.84 hz. im so fucking bummed this was my first box and being that i am satisfied with the craftmanship but RE's calculator really fucked me can anybody double check the box specs? pretty much evrything is going wrong so far. its a learning experience alright but im soo disappointed so much money and time has gone to waste. i have neither of those to spare I don't fuck around. I go from zero to I hope you die in less than 2 posts build log http://www.stevemeadedesigns.com/board/topic/104524-new-subs-coming-sundown-3500d-arc-audio-cable-lacing-crescendo/ Link to comment Share on other sites More sharing options...
Cashdollar2009 Posted August 7, 2010 Report Share Posted August 7, 2010 Bro, i'm coming up with 4.45ft^3 @ 35.06 hz with 15.76in^2 per ft^3? Looks good to me! On 6/30/2011 at 1:11 AM, 'Ray' said: Acoustical energy is free. Electrical energy is not. Link to comment Share on other sites More sharing options...
01 S-10 Posted August 7, 2010 Report Share Posted August 7, 2010 ok i really need some help here. i tried crunching numbers and using a few different box calculators. i originally designed box with REs L port calculator which it said i would end up with a 4.5 cube box tuned to 34 hz...well i measured evrything a second time and im ending up with 38 x 18 x 19 with .75 wood so 7.52 cubes gross with 4.25 x 16.5 port for 70.125 sq inch port which equals just over 9 sq inch port per cu foot and with a length of 25.5 inches i came up with a tunage of 27.84 hz. im so fucking bummed this was my first box and being that i am satisfied with the craftmanship but RE's calculator really fucked me can anybody double check the box specs? pretty much evrything is going wrong so far. its a learning experience alright but im soo disappointed so much money and time has gone to waste. i have neither of those to spare If those are your outside dimensions then its not 7.52. Subtract 1,5inches from each number(36.5x16.5x17.5=6.099cu.ft.) TDH FTW !!! Link to comment Share on other sites More sharing options...
Ji553r Posted August 7, 2010 Author Report Share Posted August 7, 2010 Bro, i'm coming up with 4.45ft^3 @ 35.06 hz with 15.76in^2 per ft^3? Looks good to me! did you do that manually or an online calculator? this is what i just used to get the 27 hz: http://www.2k4civic.com/portcalculator.html I don't fuck around. I go from zero to I hope you die in less than 2 posts build log http://www.stevemeadedesigns.com/board/topic/104524-new-subs-coming-sundown-3500d-arc-audio-cable-lacing-crescendo/ Link to comment Share on other sites More sharing options...
Ji553r Posted August 7, 2010 Author Report Share Posted August 7, 2010 If those are your outside dimensions then its not 7.52. Subtract 1,5inches from each number(36.5x16.5x17.5=6.099cu.ft.) yes i stated it was gross volume. which then net gives me 4.949 (.98 port .17 subwoofa) but then where did cash dollar get his ^3 and tunage from. this is so confusing I don't fuck around. I go from zero to I hope you die in less than 2 posts build log http://www.stevemeadedesigns.com/board/topic/104524-new-subs-coming-sundown-3500d-arc-audio-cable-lacing-crescendo/ Link to comment Share on other sites More sharing options...
Ji553r Posted August 16, 2010 Author Report Share Posted August 16, 2010 update got voltmeter installed! that is sittin idle. payed a lil bit of psyph lowest it dropped was to 13.3 ok so here is a little rant....i have it paralleled and i ordered dual 2ohm so it should be 1 ohm so now im thinking the shop fucked me and gave me dual 4. im pulling her out tomorrow to test it straight from the sub so i dont make myself look like an ass. if i can find the receipt saying i ordered dual 2 who would i contact the shop or DD or both? also when i sit at idle that number was 131 ohms what does that mean? I don't fuck around. I go from zero to I hope you die in less than 2 posts build log http://www.stevemeadedesigns.com/board/topic/104524-new-subs-coming-sundown-3500d-arc-audio-cable-lacing-crescendo/ Link to comment Share on other sites More sharing options...
lukaQ Posted August 16, 2010 Report Share Posted August 16, 2010 why didn't you check what you took? you can read what coils subs have, inner side of the spokes of the basket http://forum.soundpressure.com/attachment.php?attachmentid=4776&d=1281662995 Got carbon fiber dust cap??? Link to comment Share on other sites More sharing options...
enemyofsilence Posted August 16, 2010 Report Share Posted August 16, 2010 Nice equip! Keep it up! Team Bass-Hz Link to comment Share on other sites More sharing options...
Watch the bass Posted August 16, 2010 Report Share Posted August 16, 2010 And these Jägermeisterbillboard is for what in your system !? "in the abundance of water, the fool is thirsty" Bob Marley Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.