box idea / help

[onelivinlarge]

heres my idea anyone else have suggestions the box is for a ssd 15

[tristan560]

Don't quite get it....are those 2 ports?

[onelivinlarge]

yes 2 ports each will be 16 inches high and 2in wide so i get a total of the 32inches of port i need

[fecupe2001]

Why don´t you use a single port? would take less internal space, how many cubic feet you are getting for this box? around 4 cubic feet?

[onelivinlarge]

Why don´t you use a single port? would take less internal space, how many cubic feet you are getting for this box? around 4 cubic feet?

4 cubic feet volume inside and about 5 out side

i could do 1 port but i thought the 2 looked cool

[fecupe2001]

well, it does look cool haha, i always prefer to have a single port for a single sub, however, i have seen lots of boxes like this that pound very nice, so yes it could work, best thing it´s to try it out, however, 2" wide could be a little chucked IMO, but since it´s two of them, i guess it would work very nice, try it!!!

[onelivinlarge]

plz remember guys im not going for spl im going for sq and loud

[onelivinlarge]

here are the dementions i have to work with 17 high 33 wide and 48 deep can some one help with the tuning of this box im stumped

[fecupe2001]

here are the dementions i have to work with 17 high 33 wide and 48 deep can some one help with the tuning of this box im stumped

Well, i´m not the biggest expert here, but o give you an idea, if you are looking for 4 cubic feet after displacement with 2 ports 2" wide, if you are using a 17" tall box then the port would be 15.5" height assuming you are using 3/4" wood; i would get a box like:

17" H

33" W

19.5" D

Port:

15.5" H

2" w

25" D

this would give you 4 cubic feet and 38 hz of tuning with those two ports on L shape, someone correct me if i´m wrong...

[onelivinlarge]

thanks for the help maybe that will give me somthing to start with and try and get it down to 33hz