Team-Atomic-Andrew Posted July 24, 2010 Author Report Posted July 24, 2010 ok both boxes built and installed the top box is offset forward about 7 inches on purpose because the car slopes down in back, and it gives me a place to mount plenty of optima batteries in the back IMG]http://img530.imageshack.us/img530/6353/snc00078p.jpg[/img]
squeak Posted July 25, 2010 Report Posted July 25, 2010 why didn't you just build 1 big box instead of 2 smaller ones? jw
Team-Atomic-Andrew Posted July 25, 2010 Author Report Posted July 25, 2010 2 amps and im gonna have a switch to turn one amp off when daily driving and listeing to teh radio
Freshman6969 Posted July 25, 2010 Report Posted July 25, 2010 whats up with the baffle on the left side of the port lmao, looks like you took a chisel to it Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
Team-Atomic-Andrew Posted July 25, 2010 Author Report Posted July 25, 2010 router got away from me, its the right specs so it doesnt matter, i know it looks bad but its fine
Freshman6969 Posted July 25, 2010 Report Posted July 25, 2010 wood putty, gogo! Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
Freshman6969 Posted July 26, 2010 Report Posted July 26, 2010 doesnt look half bad, why is it uneven tho? on the side im talking about and ones pushed up further then the other? Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
Team-Atomic-Andrew Posted July 26, 2010 Author Report Posted July 26, 2010 its the camera angle, and the way the fleece set, no 2 sides will always be the same
Recommended Posts
Archived
This topic is now archived and is closed to further replies.