EricR Posted July 14, 2010 Report Share Posted July 14, 2010 The SAZ-2500D replaces the SAZ-2000D in our line-up. It packs 25% more power into a casing only 3/4" longer than the older SAZ-2000D model. The 2500D features an output section equal to our highly regarded SAZ-3000D model and an extremely robust power supply section to back it up! All of the latest technology and R&D available to us was implemented in the 2500D -- years of experience in the SPL lanes and in customer vehicles has all been taken into account. We feel that the 2500D is a very worthy addition to our line up for both hardcore SPL competitors and enthusiasts alike. We do highly recommend a high output alternator and additional battery for this model. SPECIFICATIONS: •Digital Class-D Linkable Mono Block Amplifier •Double Sided Through Hole Epoxy PCB •1 Ohm Stability •Daisy-Chain Through Output RCA •Efficiency : 86% @ 4 ohm, at 100Hz •24dB/Oct Variable Crossover •Multi-Way Protection Circuitry •(Thermal/Over Current/Speaker Short/Speaker DC Protection) •RCA Line Input and Master Output •24dB Octave Crossover Slope •24dB Octave Variable Subsonic Crossover Slope •Variable Bass Boost •Variable Low Pass Filter •Variable Phase Shift •Zero(0) Gauge Power Supply Connectors •Tested Voltage & THD : 14.4V & Less than 1% THD •Operating Voltage : DC 10V~18V •Wired Remote Controller •MSRP $1299 USD Ratings : 2500 @ 1 ohm 1200 @ 2 ohms 600 @ 4 ohms ---------- Jacobs Testing : Wired @ 1 ohm : 1690 Watts 21.4 Amps 78.97 Volts 3.69 ohms Actual Wired @ 0.25 : 3360 Watts 63 Amps 53 Volts 0.85 ohm actual Around 14v actual voltage 475 Shipped with Insurance and Tracking No Trades i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
EricR Posted July 14, 2010 Author Report Share Posted July 14, 2010 Ok since I need the money so bad...I am including these for FREE (no I will not sell them seperate) i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
Sactownbully84 Posted July 14, 2010 Report Share Posted July 14, 2010 i know u mentioned cash but ive been wanting one of these bad....willing to trade my SS XXX-4000d with my dual 1/0 inputs and 100$ 2001 Grand AM Pioneer UB4000 HU Tsunami / Monster Wire's DC POWER INC 260SP ALT w/ XS Power VCM BIG 3 All 1/0 Monster 400 + YT Under Hood Stinger SPV70 x2 in Trunk 4x SA-10's On There Way soon i hope SS XXX-4000D @ .7ohm 3K+ RF Power 4x6's & 6x9's Monsoon Powered PG TL22 Line Driver 148.7db @ 35-45hz sweep w/ 12" BTL Link to comment Share on other sites More sharing options...
EricR Posted July 14, 2010 Author Report Share Posted July 14, 2010 i know u mentioned cash but ive been wanting one of these bad....willing to trade my SS XXX-4000d with my dual 1/0 inputs and 100$ Nah man thanks for the offer but I really need cash right now. Great guy here... Thanks man i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
OrionStang Posted July 14, 2010 Report Share Posted July 14, 2010 Sorry, I don't need the amp, but did those dual inputs come from Sundown? GLWS SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
EricR Posted July 14, 2010 Author Report Share Posted July 14, 2010 Sorry, I don't need the amp, but did those dual inputs come from Sundown? GLWS No, bought them seperate from a guy on CACO that makes them. i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
EricR Posted July 15, 2010 Author Report Share Posted July 15, 2010 Bump. The price is not set in stone, shoot me an offer. i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
evermaxx Posted July 15, 2010 Report Share Posted July 15, 2010 price for pickup? Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
EricR Posted July 15, 2010 Author Report Share Posted July 15, 2010 525 i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
EricR Posted July 15, 2010 Author Report Share Posted July 15, 2010 600 Shipped i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.