Guest jbinn Posted July 21, 2010 Report Share Posted July 21, 2010 (edited) 5 cubes 34hz 18" cutout .75in MDF (single baffle) H- 20-21in W- 41-41.5in D- 21-22in Sub Firing Up Port Firing Back 1600RMS If anyone could help Id be so grateful Edited July 21, 2010 by jbinn Quote Link to comment Share on other sites More sharing options...
CarbonImpactZ Posted July 21, 2010 Report Share Posted July 21, 2010 If it were me, I would use 1" MDF just because its an 18. It wouldnt make a difference if you use 3/4 or 1 inch. Just remember to brace your box well. But the specs look good . May I ask what kind of subwoofer your going to use? Quote Link to comment Share on other sites More sharing options...
Guest jbinn Posted July 21, 2010 Report Share Posted July 21, 2010 (edited) Platform 1 PSI 1600RMS 34hz fq 5cft req ill show pictures when i get it and start my build all i Know is dave made it extra special for me and said ill love it Im planning on double baffling the front where the subs will be mounted but the rest of the box .75 Edited July 21, 2010 by jbinn Quote Link to comment Share on other sites More sharing options...
CarbonImpactZ Posted July 21, 2010 Report Share Posted July 21, 2010 The double baffling were the woofer mounts is a good idea . Cant wait to see some pics! Quote Link to comment Share on other sites More sharing options...
Guest jbinn Posted July 21, 2010 Report Share Posted July 21, 2010 yeah no doubt I really need a box design though Quote Link to comment Share on other sites More sharing options...
CarbonImpactZ Posted July 21, 2010 Report Share Posted July 21, 2010 (edited) Google sketch up XD EDIT: I can make you a design if you want? Edited July 21, 2010 by CarbonImpactZ Quote Link to comment Share on other sites More sharing options...
CarbonImpactZ Posted July 22, 2010 Report Share Posted July 22, 2010 Ive calculated all the specs. The box would be 8.7 cubes with your dementions. And you want 5 cubes, am i right? Quote Link to comment Share on other sites More sharing options...
Socky Posted July 22, 2010 Report Share Posted July 22, 2010 5 cubes 34hz 18" cutout .75in MDF (single baffle) H- 20-21in W- 41-41.5in D- 21-22in Sub Firing Up Port Firing Back 1600RMS If anyone could help Id be so grateful Off topic. I just wanted to make this clear, A 1996 jeep grand cherokee is either a I-6 or a v8, no v6s were made that early for the Grand. The sig was bothering me. lol Quote Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
Guest jbinn Posted July 22, 2010 Report Share Posted July 22, 2010 yes it's an l6 sorry about that lol w/e... thats the measurements of my rear behind the b pillar basically i can keep my seats within those dimensions... it has to be 5cubes @ 34hz thats all and what ive specified, and yes anyone that can sketch a box or whatnot please help me out i cant use google sketch at all Quote Link to comment Share on other sites More sharing options...
CarbonImpactZ Posted July 22, 2010 Report Share Posted July 22, 2010 (edited) yes it's an l6 sorry about that lol w/e... thats the measurements of my rear behind the b pillar basically i can keep my seats within those dimensions... it has to be 5cubes @ 34hz thats all and what ive specified, and yes anyone that can sketch a box or whatnot please help me out i cant use google sketch at all I will tweek some of the specs for ya. Im working on a 3d sketch atm. Ill post some new specs soon and see if you aprove EDIT: Would this work for you? W-30" H-18" D-20" That brings you to about 5 cubes Edited July 22, 2010 by CarbonImpactZ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.