hollatchaboy Posted August 12, 2010 Report Posted August 12, 2010 Just finished my build before Carlisle this past weekend and had time to get all the pics sorted and finally a vid, too! Here's the setup: 2010 Toyota Tundra TRD Rock Warrior Double Cab -2/0 Power/Ground -Factory Group 27R battery, 2 Kinetic 1800s, and 1 Kinetic 1400 -Stock 150Amp alt -Stock Radio -Audiocontrol Three.1 -Audiocontrol Epic-160 -Crossfire xp6004 powering: -(2) Beyma cp16 tweeters -(2 pairs) JL xr csi650 components -Crescendo 1000.4 powering: -(4) Beyma 6mi80 6.5's -(2) Kicker rmb8 8's for midbass -modded MA hk4000d powering: -(2) '02 flat-motored RE xxx motors with 18" PSI recones -11 cubic foot box tuned to 34hz -22" Ultra Magnus matte black wheels, on 305/45/22 tires. -15% tint over stock rear -35% tint on front windows -yellow lamin-x on fogs -smoked lamin-x on lower-half of tails -Hornblasters Shocker 240 train horn kit Here she is: Box built, test fitting baskets before building the subs: Fiberglass in the inside corners for reinforcement: Fiberglassed speaker/port enclosures on top: More glass and some bondoglass as well: Wrapping the top: Top and front are the same piece of fabric: Wrapped and ready: Loom in the top section for all speaker wires: What the loom houses... wires with male clip connectors to make it easy plug-n-play when the box goes in: Loom in the back: Loaded! All wires loomed/taped/ziptied/organized (these amps are for the highs) Note, the wires hanging from the amp... they're the female counterparts to the wires in the box loom: How do you put a box this large in??? Easy... an engine hoist and a door off! In and ready to connect! and... got the back seat in!
hollatchaboy Posted August 12, 2010 Author Report Posted August 12, 2010 Grillcraft Grill Tonno Pro Tonneau Cover Train Horn Pics & Vids: All the goods: Getting the bed ready... uh-oh, what are those batteries for??? Decided to keep things in the bed, considering it's rare I end up using the space past the wheel wells. Here's the compressor Here's the air tank My buddy Rob blastin' sparks cutting the bracket frame Rob gettin' his weld on Close-up of the bracket Ready to mount Backside Clamped and ready to drill some holes Hardest part of the install... got a bad case of the red face :mad: And... of course the vids! Here's a quick honk taken with my girl's digi cam: Here's a comparison of the stock horn and Shockers taken with my Blackberry (so, not so much quality)
hollatchaboy Posted August 12, 2010 Author Report Posted August 12, 2010 And, last but not least... vid of the subs in action while driving around. Had the Epic-160 set to peak hold and did 150. Song is Beamer, Benz, or Bentley by Lloyd Banks & Juelz Santana
superduper Posted August 12, 2010 Report Posted August 12, 2010 How much was your horn set and where did you get it from?
hollatchaboy Posted August 12, 2010 Author Report Posted August 12, 2010 $500 from hornblasters.com it's the Shocker 240 kit.
knowledge Posted August 13, 2010 Report Posted August 13, 2010 pretty dope man REFF'SMy linkEBAYhttp://feedback.ebay...ck&myworld=trueI love car audio so much because I will never be done. I can never win, and I will never get it finished or perfect. It always has me coming back for more, I can never get my fill of it, but I get what I need.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.