Johnny1upz Posted August 15, 2010 Author Report Share Posted August 15, 2010 ill get a video of the rattle tomorrow to help you understand how bad it is lol Out of rattles ive heard around my town its like 7/10 its pretty damn bad Quote Link to comment Share on other sites More sharing options...
BeachJoshua Posted August 15, 2010 Report Share Posted August 15, 2010 Only time it doesn't work for me is when it's hot.... But if you were to do it and take your time, and clean the surface and plan it out, i think it would work well, i know people use it alot on there floors under the carpet. Quote | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars Link to comment Share on other sites More sharing options...
bassl0va Posted August 15, 2010 Report Share Posted August 15, 2010 Only time it doesn't work for me is when it's hot.... But if you were to do it and take your time, and clean the surface and plan it out, i think it would work well, i know people use it alot on there floors under the carpet. It's not that it doesn't work. It's more that you need like 4 layers for it to do as well as a quality deadening product. And if you need to buy that much you might as well get the proper stuff. Quote My RE MT 18" wall build Former build, farewell beloved wall.In progress, Toyota Starlet build This forum has a massive boner for ridiculous electrical upgrades. Link to comment Share on other sites More sharing options...
Second Skin Posted August 18, 2010 Report Share Posted August 18, 2010 It's not that it doesn't work. It's more that you need like 4 layers for it to do as well as a quality deadening product. And if you need to buy that much you might as well get the proper stuff. More or less true. The cheaper stuff is usally made primarily out of roofing materials, and will melt, losing almost all of it's effectiveness in higher temperatures, as well as being less effective to begin with, so if you live in an area where it can get fairly hot, you almost get less than what you pay for. however i understand budgets and why people would go with the less expensive materials. However, It's much more effective to save up for the more expensive products, weather it's Second Skin, Dynamat, or any of the other higher quality companies, and just do the car small sections at a time. you want to start with the doors, then the floors, then trunk, and finaly roof. those areas tend to be most problematic in that order. if you purchase a cheaper product, do not apply it to the roof, as it will more than likely fall on your head at some point, which will be smelly, messy, and if it happens while you're driving, hazardous to your health. feel free to call us or email us if you have specific questions pertaining to any sound damping product. both our email and phone number are on our website AX Quote Whether you are restoring a classic muscle car, building an audio system monster, or trying to give yourself a bit of silent luxury on your daily commute, we have a product or combination of products that will help you achieve your goals while saving money and save time. Look around our site, educate yourself and make the choice that is right for you. Over built to over perform - because user error, bad batch, and faulty install are excuses that other companies use! Link to comment Share on other sites More sharing options...
onelivinlarge Posted August 19, 2010 Report Share Posted August 19, 2010 i used a product simulr on my rear deck and i did not like it Quote 1) lookj to left 2) NOTICE BLKUE 3) ME > Y9OU 4) that is all Link to comment Share on other sites More sharing options...
Second Skin Posted August 24, 2010 Report Share Posted August 24, 2010 i used a product simulr on my rear deck and i did not like it do you remember what the brand was? Quote Whether you are restoring a classic muscle car, building an audio system monster, or trying to give yourself a bit of silent luxury on your daily commute, we have a product or combination of products that will help you achieve your goals while saving money and save time. Look around our site, educate yourself and make the choice that is right for you. Over built to over perform - because user error, bad batch, and faulty install are excuses that other companies use! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.