snackeyg Posted August 23, 2010 Author Report Share Posted August 23, 2010 (edited) Uhm, it does matter because you may not get full power. Also, some people dont wanna dish out the money on electrical to have their amp at .25 ohms Dual 4 Ohm. Thanks for the answers. I'll probably go with a SAZ-2500D. I didn't think I could even do 4 subs on one amp. I though I would need two. I'm not gonna do this set up on my own. I'm not gonna be that stupid. I'll have someone help me. Edit:Or if I feel like dishing out the money would a RF 2500bd work too? Edited August 24, 2010 by snackeyg Quote Link to comment Share on other sites More sharing options...
15VmaxXL Posted August 23, 2010 Report Share Posted August 23, 2010 Why dont you order d2s. Have a final ohm load of 1... Quote sold everything Link to comment Share on other sites More sharing options...
chapo123 Posted August 24, 2010 Report Share Posted August 24, 2010 Why dont you order d2s. Have a final ohm load of 1... this.. you can bridge them all togther and only have one pos and one neg coming out and put that in the single amp. Quote Steve I don't know why but everytime I see your new paint I want a Dr. Pepper...... is this normal? heres an analogy for you. running a high power stereo without a fuse is like having unprotected sex with that hot chick at the bar with the sketchy sexual history. Sure you may be fine and nothing happens but that one time something does happen you're fucked. i dont want woofer broke like bass sound clip clip and voice coil overheat 2 sa12s, saz1500 build log http://www.stevemeadedesigns.com/board/topic/91183-chapo123s-sundown-build-log/page__gopid__1250604entry1250604 Link to comment Share on other sites More sharing options...
memphisbasshead Posted August 24, 2010 Report Share Posted August 24, 2010 if you need 2 amps get two audiopipe ap1500's with 4 dual 4 ohm dc level 3's so you can get a 1 ohm load for each amp or just get 1 audiopipe ap3000d and get 4 dual 2 ohm dc level 3's so you can have a final load of 1 ohm. audiopipe makes great budget amps Quote My Car Audio Setup: Sub: 1 RE Audio HC 15 Dual 2 ohm(soon to get a psi recone) Daily Sub Box: 1.62 cubes net with 2 dayton audio 8 inch passive radiators tuned to 34.35 hz, 141.9 @ 48 hz sealed on the dash with termlab Competition Sub Box: 3.10 cubic ft. net tuned to 50.58 hz with 2 6 inch aeroports, 147.9 @ 62 hz sealed on the dash with termlab Amp: Powerbass ASA 1000.1 Dx(eventually gonna get a planet audio bb2400.1) Big 3: Phoenix Gold 1/0 Gauge Amp Wire: Knukoncepts 1/0 gauge Alternator: Stock 90 amp Battery Under the hood: Autocraft Gold Top Battery Battery In Back: None for now but I am looking for one so pm me if you have one for sale HU: Pioneer DEH-2900MP Front/Rear Amp: Hifonics Txi-4408 4 channel amp Front Speakers: Orion Cobalt 6.5 coaxial Rear Deck Speakers: Orion Cobalt 6x9 coaxial Home Audio Setup: Speakers:2 Cerwin Vega D-3's (10" Woofer,5 1/4" mid-range,1" Bullet Dome Tweeter) 2 Cerwin Vega D-5's (12" Directed Audio Xtreme 124SX Subwoofer,5 1/4 mid-range,1" Bullet Dome Tweeter)Kenwood center channel and rears. Amp: 2 Kenwood KM-105's from 1985 Receiver: JVC RX-6008V 5.1 Channel Receiver Pre-Amp: Kenwood KC-993 Sub: still looking for one thinking about getting a 18 or 15 for my sub to hit the lows if anyone has one pm me I do free box designs if anyone is interested Link to comment Share on other sites More sharing options...
dwright27 Posted August 24, 2010 Report Share Posted August 24, 2010 if you need 2 amps get two audiopipe ap1500's with 4 dual 4 ohm dc level 3's so you can get a 1 ohm load for each amp or just get 1 audiopipe ap3000d and get 4 dual 2 ohm dc level 3's so you can have a final load of 1 ohm. audiopipe makes great budget amps being as the ap3000 is stable at 2 ohms thats great suggestions huh? Quote 2006 F-150 4 DC XL M2 18's Walled Daily Driver XS Power 4 DC 3.5kw Team DC Team S.P.L. Lot of Audio Technix and 1/0 DC Audio Dealer American Bass Dealer XS Power Dealer Audio Technix Dealer Link to comment Share on other sites More sharing options...
Team Sundown's Charles Posted August 24, 2010 Report Share Posted August 24, 2010 if you need 2 amps get two audiopipe ap1500's with 4 dual 4 ohm dc level 3's so you can get a 1 ohm load for each amp or just get 1 audiopipe ap3000d and get 4 dual 2 ohm dc level 3's so you can have a final load of 1 ohm. audiopipe makes great budget amps YEA the audiopipe are some very good budget amps Quote 1993 Mazda Mx-3 Subs: 2 18" DC Audio Lvl 4 D.7 Highs amp: Sundown SAX-100.4 Sub amp: Sundown SAZ-3000D Electrical:Kinetik 1200 under hood, 2-Kinetik 2400 rear All 1/0 KnuKonceptz Wire Power/Ground, Big 3, 8Ga Speaker Wire, KnuKonceptz Karma RCA's Dampening: 120sqft 80Mil Thick Sound Destroyer Mat Goal: 150 DB 149.9 Street Bass Link to comment Share on other sites More sharing options...
matt402 Posted August 24, 2010 Report Share Posted August 24, 2010 being as the ap3000 is stable at 2 ohms thats great suggestions huh? x2. he has d4's so go for the audiopipe =]. Quote Link to comment Share on other sites More sharing options...
memphisbasshead Posted August 24, 2010 Report Share Posted August 24, 2010 (edited) being as the ap3000 is stable at 2 ohms thats great suggestions huh? wow i feel like a complete dumbass Edited August 24, 2010 by memphisbasshead Quote My Car Audio Setup: Sub: 1 RE Audio HC 15 Dual 2 ohm(soon to get a psi recone) Daily Sub Box: 1.62 cubes net with 2 dayton audio 8 inch passive radiators tuned to 34.35 hz, 141.9 @ 48 hz sealed on the dash with termlab Competition Sub Box: 3.10 cubic ft. net tuned to 50.58 hz with 2 6 inch aeroports, 147.9 @ 62 hz sealed on the dash with termlab Amp: Powerbass ASA 1000.1 Dx(eventually gonna get a planet audio bb2400.1) Big 3: Phoenix Gold 1/0 Gauge Amp Wire: Knukoncepts 1/0 gauge Alternator: Stock 90 amp Battery Under the hood: Autocraft Gold Top Battery Battery In Back: None for now but I am looking for one so pm me if you have one for sale HU: Pioneer DEH-2900MP Front/Rear Amp: Hifonics Txi-4408 4 channel amp Front Speakers: Orion Cobalt 6.5 coaxial Rear Deck Speakers: Orion Cobalt 6x9 coaxial Home Audio Setup: Speakers:2 Cerwin Vega D-3's (10" Woofer,5 1/4" mid-range,1" Bullet Dome Tweeter) 2 Cerwin Vega D-5's (12" Directed Audio Xtreme 124SX Subwoofer,5 1/4 mid-range,1" Bullet Dome Tweeter)Kenwood center channel and rears. Amp: 2 Kenwood KM-105's from 1985 Receiver: JVC RX-6008V 5.1 Channel Receiver Pre-Amp: Kenwood KC-993 Sub: still looking for one thinking about getting a 18 or 15 for my sub to hit the lows if anyone has one pm me I do free box designs if anyone is interested Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.