belltech 1" - 3" / 4" Stage 1 Lowering Kit help

[lastfrontier907]

ok so i have been researching drop kits for my truck on and off and finally want to order one. i found what i want.

i dont know anything about a torsion drop.

i also dont know if im going to need new shocks.

any advise will help. would also love to see some older chevy's with this or a similar kit installed

thanks

[thehoe92]

ok so i have been researching drop kits for my truck on and off and finally want to order one. i found what i want.

i dont know anything about a torsion drop.

i also dont know if im going to need new shocks.

any advise will help. would also love to see some older chevy's with this or a similar kit installed

thanks

stay far away from torsion drops..

it is the cheapest way to get the front lowered and for a good reason

when you use torsion keys you will be changing the geometry of your stock control arms causing it to be very hard to align..

obviously every case is different but I have never been able to get my camber back to spec and its ruining my tires quickly!

I would say look into getting some spindles or lower control arms and last resort is do torsion keys

[lastfrontier907]

i have a 4 wheel drive truck i dont know if i have another option

[Spitfire2k6]

What type of suspension do you have at the moment mate?

Springs, Leafs, Torsion bar etc?

If its a torsion bar I wouldn't recommend lowering it, it will only cause you pain...

[sphinxbccp]

my friend has a mountaineer with a torsion bar on the front and we did a 2" drop in front and 3" in the rear, this was probably 6 months ago, no problems so far