dman1049 Posted September 26, 2010 Report Posted September 26, 2010 got it from a friend, the amp got wet i took it apart and the amp had a section of solder joints that were corroded and i fixed it with fresh solder and jumper wires where they were needed. the amp still doesnt work, the power light comes on as it always has and the fan comes on but the amp still doesnt make noise of clicking on and has no output to my subs, is there a way i can find whats not working malfunctioned or whats shorted?
Boon Posted September 26, 2010 Report Posted September 26, 2010 Eeeeek.... jumper wires? Get me some pics of the amp's insides and I'll see what I can see. 10.x volts fo' life!
dman1049 Posted September 26, 2010 Author Report Posted September 26, 2010 i dont have a camera at the moment, the corrosion was so bad that the green coating chipped off, not a big spot but noticeable so i filled the spot with solder and ran jumper wires from the voltage regulators to the spot with solder.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.