dman1049 Posted September 26, 2010 Report Posted September 26, 2010 got it from a friend, the amp got wet i took it apart and the amp had a section of solder joints that were corroded and i fixed it with fresh solder and jumper wires where they were needed. the amp still doesnt work, the power light comes on as it always has and the fan comes on but the amp still doesnt make noise of clicking on and has no output to my subs, is there a way i can find whats not working malfunctioned or whats shorted?
bassl0va Posted September 26, 2010 Report Posted September 26, 2010 You need to summon Boon, haha. Was it powered on when it was wet? My RE MT 18" wall build Former build, farewell beloved wall.In progress, Toyota Starlet build This forum has a massive boner for ridiculous electrical upgrades.
dman1049 Posted September 26, 2010 Author Report Posted September 26, 2010 yes it did get powered on when it got wet.
bassl0va Posted September 26, 2010 Report Posted September 26, 2010 That would have screwed something on the board up by shorting it then. I don't know what though. My RE MT 18" wall build Former build, farewell beloved wall.In progress, Toyota Starlet build This forum has a massive boner for ridiculous electrical upgrades.
dman1049 Posted September 27, 2010 Author Report Posted September 27, 2010 how can i figure out whats shorted, blown or whatever isint working?
bassl0va Posted September 27, 2010 Report Posted September 27, 2010 By asking Boon. He'll have a better idea of what's going on. I'd guess you'd have to test each of the parts which could be damaged. My RE MT 18" wall build Former build, farewell beloved wall.In progress, Toyota Starlet build This forum has a massive boner for ridiculous electrical upgrades.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.