jmitch Posted October 2, 2010 Report Share Posted October 2, 2010 I need a 6th order bandpass design for 2 dc lvl4 xl 18s the measurements i wanna work with is 26h*48w*40d the depth can be more or less if need be. let me know what can be done I know a lil about everything so dont call me Mr. Know it All. Link to comment Share on other sites More sharing options...
jmitch Posted October 3, 2010 Author Report Share Posted October 3, 2010 well since no one seems to wanna help i came up with these numbers and tell me what u think. rear chamber is 26h*22w*40d tuned 34 front chamber is 26h*26w*40d tuned 46 I know a lil about everything so dont call me Mr. Know it All. Link to comment Share on other sites More sharing options...
Socky Posted October 4, 2010 Report Share Posted October 4, 2010 Sounds like that will love the lows. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.