Carroot1 Posted October 19, 2010 Report Posted October 19, 2010 So im looking at this http://www.sonicelectronix.com/item_7324_Kinetik+HC+600+-KHC600,+HC600,+KHC+600-.html to replace my stock car battery. I also have a walmart battery under the hood for starting the car. I measured the power and my amp is getting 14-13.7vs at full tilt. Im wondering if i should even get this or if it will help at all. Thanks
mikeg321 Posted October 19, 2010 Report Posted October 19, 2010 If your not dropping below 12.8v it's not going to do much. And I believe mixing a AGM battery with a wet cell is a no no. 4 fully loaded Fi sp4 15's 2 Crescendo bc5500s Crescendo c1100.4 6 focal mids Vifa tweets 5 XS Power d3100's Pioneer avh-p4200dvd All crammed into a mustang. http://www.stevemeadedesigns.com/board/topic/150569-mikeg321s-fi-nendo-mustang-getting-walled-videos-page-4/
ingramcaraudio Posted October 19, 2010 Report Posted October 19, 2010 You can mix but you will need a isolator and i don't think it will help alot since your voltage is doing pretty good. Facebookhttp://www.facebook.com/#!/pages/Farmville-VA/Rockwell-Audio/103036213076623?ref=ts
Carroot1 Posted October 19, 2010 Author Report Posted October 19, 2010 yea thats what i figured.. pretty damn good for a battery with 150,000 miles on it
Recommended Posts
Archived
This topic is now archived and is closed to further replies.