Jump to content

Alpine R's, and Hifonics SOLD MODS, PLEASE LOCK


Recommended Posts

SOLD

changing direction completely.....

kinda tired of my truck being consumed by audio. So going for more of a SQ system. hidden, clean, and clear as a bell. so that means getting rid of half my stereo. Would rather sell locally, so you can hear/test the equipment for yourself. but if no interest within a reasonable amount of time, may ship.

Sorry, they are all 12's

(2) DVC 2 ohm type r's.........asking $90+shipping each sub

cosmetic/mechanical 9/10. only gave a 9 because I cut the gaskets to use backwards when I had them inverted in the box. like new. never got to put full power to them. didn't want to push the brutus until I had enough amperage for them. have 4, but keeping 2. if local, you can pick which ones you want:)

IMG_3785.jpg

IMG_3786.jpg

(1) DVC 4 ohm type r...........asking $100+shipping

cosmetic/mechanical 10/10. This one was for wifes car. put in sealed enclosure and sat in closet. never got her an amp to power it. ran once to hear box in her trunk with wire from my truck:)

IMG_3787.jpg

IMG_3788.jpg

(1) Hifonics BXI2610D mono amp. asking $300+shipping

cosmetic/mechanical 10/10. pulled from box, mounted on roof, pulled from roof, put back in box. I have 2 of these. keeping one that I broke the warranty seal on to see the guts. selling the sealed one. perfect amp, always had gain about 1/4 way due to not enough batteries. never even got to warm her up yet-lol

1 x 850 W @ 4 Ohms, 1 x 1700 W @ 2 Ohms, 1 x 2600 W @ 1 Ohm. Bass EQ with 45Hz bass boost and variable control from 0db to 10db; Variable Low Pass, Subsonic Filter, Phase Shift and Level Control. Balanced line input for MX accessories and line drivers. Built-In System Diagnostics protects from short circuits, over load, thermal overheat and DC Offset; Bass Remote included. Link & Sync feature allows the mono amps to be strapped or bridged via master/slave configuration.

IMG_3792.jpg

IMG_3791.jpg

IMG_3790.jpg

IMG_3789.jpg

Edited by 98crewcab

06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck)

7" BDS HC lift kit

(5) 37x13.5R18 Toyo Open Country M/Ts

(5) 18x10 Moto Metal MO962

tablet in lieu of deck

blue tooth interconnect to soundstream eq (for volume control and bass control)

4 Alpine type r 10's

6 cubes net, 80sqin's port, tuned to 33hz

2 brutus brx5000.5's

2 pairs 3" polk audio for a pillars

4 pairs polk audio 6.5 comps

1 pair 8" polk audio for mids

2 xspower d3400 batteries

.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!

P.S. Thanks Steve....for the demo!!!! loud as fauk!

Link to comment
Share on other sites

also wanted to mention, gutted my doors. anyone interested in the glass work I already started....is welcome to them. they are as seen in pic below. local can come pic them up. NOT SHIPPING!!! lol

IMG_3572.jpg

IMG_3573.jpg

this is the direction I was going with them.

IMG_3541.jpg

need to attach to upper part of door panel, and build handle. keeping upper door panels for now (unless you have a crewcab or suburban and wish to trade for all panels)

06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck)

7" BDS HC lift kit

(5) 37x13.5R18 Toyo Open Country M/Ts

(5) 18x10 Moto Metal MO962

tablet in lieu of deck

blue tooth interconnect to soundstream eq (for volume control and bass control)

4 Alpine type r 10's

6 cubes net, 80sqin's port, tuned to 33hz

2 brutus brx5000.5's

2 pairs 3" polk audio for a pillars

4 pairs polk audio 6.5 comps

1 pair 8" polk audio for mids

2 xspower d3400 batteries

.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!

P.S. Thanks Steve....for the demo!!!! loud as fauk!

Link to comment
Share on other sites

so how much for 2 alpine type r's and how much for 1

its in the first post. $90 each for the DVC 2ohms because they are missing the gaskets. and $100 for the DVC 4ohm. its new. played for about half an hour. been sitting in the closet in a sealed enclosure for a few months. 8)

06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck)

7" BDS HC lift kit

(5) 37x13.5R18 Toyo Open Country M/Ts

(5) 18x10 Moto Metal MO962

tablet in lieu of deck

blue tooth interconnect to soundstream eq (for volume control and bass control)

4 Alpine type r 10's

6 cubes net, 80sqin's port, tuned to 33hz

2 brutus brx5000.5's

2 pairs 3" polk audio for a pillars

4 pairs polk audio 6.5 comps

1 pair 8" polk audio for mids

2 xspower d3400 batteries

.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!

P.S. Thanks Steve....for the demo!!!! loud as fauk!

Link to comment
Share on other sites

my afternoon/daily bumpity bump :drinks:

06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck)

7" BDS HC lift kit

(5) 37x13.5R18 Toyo Open Country M/Ts

(5) 18x10 Moto Metal MO962

tablet in lieu of deck

blue tooth interconnect to soundstream eq (for volume control and bass control)

4 Alpine type r 10's

6 cubes net, 80sqin's port, tuned to 33hz

2 brutus brx5000.5's

2 pairs 3" polk audio for a pillars

4 pairs polk audio 6.5 comps

1 pair 8" polk audio for mids

2 xspower d3400 batteries

.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!

P.S. Thanks Steve....for the demo!!!! loud as fauk!

Link to comment
Share on other sites

Happy "last day of work for the next 4 days" Day!!!!! bump :clapping:

06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck)

7" BDS HC lift kit

(5) 37x13.5R18 Toyo Open Country M/Ts

(5) 18x10 Moto Metal MO962

tablet in lieu of deck

blue tooth interconnect to soundstream eq (for volume control and bass control)

4 Alpine type r 10's

6 cubes net, 80sqin's port, tuned to 33hz

2 brutus brx5000.5's

2 pairs 3" polk audio for a pillars

4 pairs polk audio 6.5 comps

1 pair 8" polk audio for mids

2 xspower d3400 batteries

.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!

P.S. Thanks Steve....for the demo!!!! loud as fauk!

Link to comment
Share on other sites

Bump Bump Bump it up! lol

:turkey: Happy turkey day brotha's! :turkey:

06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck)

7" BDS HC lift kit

(5) 37x13.5R18 Toyo Open Country M/Ts

(5) 18x10 Moto Metal MO962

tablet in lieu of deck

blue tooth interconnect to soundstream eq (for volume control and bass control)

4 Alpine type r 10's

6 cubes net, 80sqin's port, tuned to 33hz

2 brutus brx5000.5's

2 pairs 3" polk audio for a pillars

4 pairs polk audio 6.5 comps

1 pair 8" polk audio for mids

2 xspower d3400 batteries

.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!

P.S. Thanks Steve....for the demo!!!! loud as fauk!

Link to comment
Share on other sites

i want door panels.. lets make them fit gawd damn it!

BUILDLOG

http://www.stevemeadedesigns.com/board/ind...showtopic=61862

"98crewcab"Never a POS....just always "a work in progress" lol that's how we roll bitches!!!

Your a lowlife kid. I bet your mother wants to kill herself for not swallowing your ass.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1153 Guests (See full list)

×
×
  • Create New...