dc audio lvl 4 what one would you use?

[dd9515mmatsjugg]

OK so i came up with a few Deferent box'es and want some input from the fella bass heads

first we have a 5.66 cube's after displacement 1 10" port

next is 3 6" ports

and the next 2 are for a bandpass box first pic is the sealed part

and the parted part

let me know any help will be much appreciated

[hdorre]

I'm guessing you're doing a 15 with very little power or an 18 with tons of power

[dd9515mmatsjugg]

I'm guessing you're doing a 15 with very little power or an 18 with tons of power

a 15 with little power 500 RMS till Christmas is done ya know wife n baby want allot of gifts so the audio is on hold a bit so a new box will do.......for now lol then im ordering a 18" re-cone/basket off rusty and Gina do 2k on it.

[Robert8252]

I like the first one the best. FYI 10" PVC can be hard to get some places.

[dd9515mmatsjugg]

I like the first one the best. FYI 10" PVC can be hard to get some places.

i got the 10 pvc already from an older instal i did this will be in a 99 2dr jimmy i have 38 side to side, 38 front to back and, 23 high dam 10" pvc is a huge some b!@#h

[Cashdollar2009]

Finding ways to bend it without worrying about unloading issues can be a pain too. I've recently started playing with aeros and I have been getting a lot of feedback on this too. So I made it 5 inches external with a "beauty box" around the port so I just don't have tube sticking out.

If external port isn't a problem or you already have something in mind, my apologies, just throwing some flags out there that I have found.

[Robert8252]

Oh yeah. Don't bend aeros. It didn't work too good for me

[dd9515mmatsjugg]

Finding ways to bend it without worrying about unloading issues can be a pain too. I've recently started playing with aeros and I have been getting a lot of feedback on this too. So I made it 5 inches external with a "beauty box" around the port so I just don't have tube sticking out.

If external port isn't a problem or you already have something in mind, my apologies, just throwing some flags out there that I have found.

i was thinking somethin like this

or this one hear but this one is sub up port sideways

[dd9515mmatsjugg]

Oh yeah. Don't bend aeros. It didn't work too good for me

i haven't tried yet lol thanx for the heads up fella's i would'v tried and fck'd it up lmao

[dd9515mmatsjugg]

I'm guessing you're doing a 15 with very little power or an 18 with tons of power

CHANGE IN PLAN I am now using a rockford T20001 bd for this set up now so would a 3 and a half cube be good im going for 29hz