Specs for RE Audio MT18s?

[Antripodean]

Hi

First post Asking about this driver which I can find very little on the net about so I thought I would come to the forum where people use these beasts! There are some great builds on here

I was wondering if anyone had Thiele/Small (T/S) parameters for this driver? I use WinISD to model and I usually run sealed (thinking 5 cu ft). I want to work out the best box size and how much power I need to get where I want to be.

Hoping you can help Thanks

[Loudcivic]

[FreekDesignz]

i knew this video would would come in handy someday.

[Loudcivic]

i just dont get it. it has been asked so many times. just do a search and you will find all the info you need. and if for some reason you cant find the info then say i just searched and i cant find any info on these subs. btw i dont think ive ever seen those subs in a sealed box and i think there is a reason for it

[MrSoHeavySPL]

Hi

First post Asking about this driver which I can find very little on the net about so I thought I would come to the forum where people use these beasts! There are some great builds on here

I was wondering if anyone had Thiele/Small (T/S) parameters for this driver? I use WinISD to model and I usually run sealed (thinking 5 cu ft). I want to work out the best box size and how much power I need to get where I want to be.

Hoping you can help Thanks

Maybe he did already?

EDIT: i found this 5 seconds after i posted bro must not have looked long enough http://reaudio.com/specs.html#sp_mt

Edited December 19, 2010 by MrSoHeavySPL

[Loudcivic]

hmm then maybe he would of found this with a quick search http://www.stevemeadedesigns.com/board/topic/68230-re-mt-18s-d-07-alright-u-re-guys-i-need-some-specs/

its not that hard to enter what your searching for then go through 5 or maybe even 15 pages to find your answer. i cant tell you how many times i have done this. yes it sucked going through a lot of pages but i found what i was looking for

Edited December 19, 2010 by Loudcivic

[CaptainzPlanetz]

http://lmgtfy.com/?q=18%22+RE+MT

[Ford302Redneck]

MT's aren't designed for a sealed box.

Sometime programs like that and SPLish subs doesn't agree. You can try, but you might find that it causes for a tiny sealed box and in real world it will the worst sounding thing imaginable.

Edited December 19, 2010 by Ford302Redneck

[Loudcivic]

http://lmgtfy.com/?q=18%22+RE+MT

lol

[Antripodean]

EDIT: i found this 5 seconds after i posted bro must not have looked long enough http://reaudio.com/specs.html#sp_mt

Hi All, I appreciate all your good advice. No, there are no specs on the RE site - just lots of question marks. If you don't think I searched then that's cool but lettin' you know I didn't post to waste your valuable time

It seems the best understanding I have is that they need to be ported. Such is life. Have a great holiday season