Ford302Redneck

No worries on my end. Others might not of liked it, from me anyways.

So your theory is that a 3.5 k board is going to defy the laws of electronics and make more power then a 4.2 k board? Please enlighten me. If I would of said this people would get pissy. Even though I did say something similar. Well difference between me and others is I have ALOT of electrical experience. I meant you came across as kind of a dick.

Ford302Redneck, the hurter of feelings. Most of the time the shit I say isn't even that bad. It just isn't what everybody else says. I like the Warhorse idea though. For 1200 dollar, you can't find 10k RMS. Plus the fact its supposedly 90% efficient. I wonder where they measured the efficiency at? 4ohms and 100hz? Or whatever most amps are measured at.

So your theory is that a 3.5 k board is going to defy the laws of electronics and make more power then a 4.2 k board? Please enlighten me. If I would of said this people would get pissy. Even though I did say something similar.

I meant, to need 10, the spiders must be soft. But 10 together should be very damn stiff.

I agree Steve, being inside of your vehicle is important. Who say your subs are on the point of blowing, as if they are cooking and smelling right and you have no idea. Yet if you was inside you would of noticed the warning signs and possible saved the equipment. I much rather save my equipment and my money instead of standing on the outside.

They must be super soft. Lol. I know 5 spiders is pretty common on SPLish type subs. But 10? Seems like a lot.

10 spiders? Holy Batman!

Hdorre, Oh. Right on then. Lol. I'm not 100% how a maxxlink works, as I've never messed with one. But I know its not the same as a 3sixty, or close for that matter.

Im almost positive I know the answer after thinking about it for a few mins lol. If I were to buy a sound processor, I'd get a 3Sixty Oh, my bad lol. That didn't seem like something you'd say, so I was a bit confused about that too haha Wtf..your the BIGGEST liar on SMD. Your nickname should be JP SR because you're more fake than Santa Clause!! Lol, jk. Keep doing what you're doing bahaha A maxxlink isn't a sound processor. And why didn't my post sound like me? Because I'm not "bashing". I make useful more than bashing ones, just nobody points them out.

But how would you wire that? I guess you could wire 2 subs to 1 amp, and give each additional sub its own amp..but that wouldn't be the preferred way if the subs are sharing an enclosure. I didn't mean for the OP to actually buy 3. Just meant for the price, you can get 3 3.5ks.

Do you have any relation with Ami Creations? Anyways how do you know the aq3500.1 does more than the DC 3500 just want to know? I'd also go with 2 3500s instead. Because the AQ board is designed/built to produce more power. Also the reason for the price difference. Nothing against the DC. Just that's the board DC picked vs the one AQ picked. I would think the older AQ 3500 is comparable to the DC 3.5 I would assume.

I hope you can. 4200watt vs 3500watt. Two DC 3.5s won't keep up with 1 AQ20k IMO. But for the money you can buy 3 3.5s. Which is more power I assume.

I'd be interested in what Rusty would come out with.

Yeah, the 20k is a ~9kw amp. So double one 3500. So two 3500 would be cheaper and put out similar power. But check into DC 9kw, I'm not sure if they have any left, but it will be similar to the 20k, for less money.

Sweet

I bet you can spot either from a mile away. You should shoot me a text sometime Nick. Its been to long.

Tempting. Is it a dual1 or dual 2 or universal?

The coils have different thickness, the dual2 is thicker than the dual 1. So when they say the optimize the motor is the dual 1 has a tighter gap than the dual 2 motor. It basically means they both have the same motor strength when they do it this way. Instead of having a huge gap for a little coil and less strength. Fi doesn't do marketing hypes. I don't even know why you would think that. They try to give you the a sub built exactly how you want it. This does have a few draw backs in trying to buy used and having to perfectly match them. Do you have the universal option? If not, I would just keep looking, until you find a dual1 motor.

Once you use a table saw, you don't want to use nothing else.

Its sad that anybody who says one negative thing about DC, you all think they are "haters". People on this website is a little to touchy about their beloved DC. Its ok, not everybody is going to like DC, and you shouldn't expect them to.

Interesting. I didn't realize they was all the same. I don't understand why people upgraded to XXX recone to make a Sexxx. If only the spiders was different. But I'm sure you would know so I can doubt you. Also, the old Fi SSD (flatwind) recone will work. I'm not sure about the new ones.

Pre 05 RE XXX coil will fit. Those made SeXXX, and if I was going to upgrade, I'd probably go that route.

That's what I was thinking. Its common in HT to have 18s.

I'm going to disagree. Cone area really has nothing to do with SQ to a certain extent. That's like saying you can only uses 6.5 inch mids.