Dj_Scarface Posted January 26, 2011 Report Share Posted January 26, 2011 Ok im looking for some sub box ideas for my 93' Ford Bronco. seeing as I use all Mac computers for school & DJing, I cant use Torres' Box Tuning Calculator or the sketchup programes... I want/trying to run four DC Audio lvl 4 12's in one box in the space left between the back seat & the tailgate. After i put the amps on the back of the seat & batteries right below the amps behind the seat. I want the sub box to two or more sheets of MDF thick for each side of the box The specs for the space behind the seat are: D {F-B}: 29 1/2" [rounded off] 29" W {S-S}: 50 1/2" [rounded off] 50" H {window line}: 21" The specs for the space behind the seat after taking 10" for the batteries & amps are: D {F-B}: 20-22" W {S-S}: 50" H {window line}: 21" Dj_Scarface talk to mazdaspl he is the one who hooked me up with the box design. mantz88 told me mazdaspl helped him... wonder if you or anybody on this forum can help me. im go do all the work i just need ideas & box math help Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
EclipseChris Posted January 26, 2011 Report Share Posted January 26, 2011 Shoot my buddy in my sig a PM. He does amazing work. Only person i trust doing designs for me. Quote i resolve to be a nicer moderator. Tercel build R.I.P. Eclipse build Old New V-Dub My feedback. Link to comment Share on other sites More sharing options...
Dj_Scarface Posted January 27, 2011 Author Report Share Posted January 27, 2011 Shoot my buddy in my sig a PM. He does amazing work. Only person i trust doing designs for me. ok Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
RAM_Designs Posted January 27, 2011 Report Share Posted January 27, 2011 (edited) How close is that 22" depth to the hatch door? Are the amps/batts going between the box and seat or box and door? Edited January 27, 2011 by RAM_Designs Quote Ryan Miskin - owner of RAM Designs I have my PM's turned off, please email at <script data-cfhash='f9e31' type="text/javascript"> /* */</script> 2200+ designs since March 2011... Link to comment Share on other sites More sharing options...
Dj_Scarface Posted January 27, 2011 Author Report Share Posted January 27, 2011 How close is that 22" depth to the hatch door? Are the amps/batts going between the box and seat or box and door? the amps & batteries are between the seat & box... the 22" depth is cut up from the full 29 1/2" of depth in the rear of the truck: taking 3 1/2" for the batteries since the seat is at a angle i dont need the full 7" but i added it any way. then i added 3" more inches for the hight on the amps at the top of the seat. So if my math right I got 4-5" to play with between the box & tailgate. I only need 3" to reach in & open the tailgate. then again if the math is wrong i can slide the box back & put the batteries between the box n hatch or raise the box & put the batteries under it... Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Dj_Scarface Posted January 28, 2011 Author Report Share Posted January 28, 2011 bump... Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Dj_Scarface Posted January 30, 2011 Author Report Share Posted January 30, 2011 Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Dj_Scarface Posted February 3, 2011 Author Report Share Posted February 3, 2011 no more ideas? Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Byrne Posted February 3, 2011 Report Share Posted February 3, 2011 (edited) hmmm interesting... Edited February 3, 2011 by Byrne Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.