Jump to content
Sonic Electronix

Recommended Posts

Posted (edited)

I have inherited a 97 buick park avenue (big bodies Baby!!!)and noticed that the radio(factory) doesn't even come on.I did some investigations and come to find out that somebody chopped the harness off and left naked wires everywhere. Usually I would be easily able to hook up one of my aftermarket radios without having to even buy a quick connect harness. But this is pure hell. I have never seen this many wires go to the back of a radio. I know there is a factory amp in the trunk and there are controls on the steering wheel for the radio but i cant even find one 12 volt lead. Can someone please point me in the right direction. Could be a fuse blown but I have read that there are 3 fuse panels in this car also......fml! Any advice would be appreciated

Edited by 360wayvin
Posted

I have inherited a 97 buick park avenue (big bodies Baby!!!)and noticed that the radio(factory) doesn't even come on.I did some investigations and come to find out that somebody chopped the harness off and left naked wires everywhere. Usually I would be easily able to hook up one of my aftermarket radios without having to even buy a quick connect harness. But this is pure hell. I have never seen this many wires go to the back of a radio. I know there is a factory amp in the trunk and there are controls on the steering wheel for the radio but i cant even find one 12 volt lead. Can someone please point me in the right direction. Could be a fuse blown but I have read that there are 3 fuse panels in this car also......fml! Any advice would be appreciated

This may help you.

http://www.the12volt.com/installbay/stereodetail/352.html

First System

2002 Impala LS 3.8L V6, 128,365k miles.

Alternator: DC Power 190Amp H/O Alternator

Headunit: Kenwood KDC-BT945U.

Speakers: MBQuart 6.5" Comps, 6x9 3-way.

Amplifer: Eclipse 3322 on front 6.5 components, and a Infinity Kappa One @ 2ohm- 800w

Subwoofers: 2 REAudio SRX12D2 wired to 2 ohm.

Box: 3.1cuft box tuned to 33hz. sealed off to cabin

Big 3- done with all Knukonceptz KCA 0 gauge.

Don't drop below 14.1v at full tilt. :)

Posted

I have inherited a 97 buick park avenue (big bodies Baby!!!)and noticed that the radio(factory) doesn't even come on.I did some investigations and come to find out that somebody chopped the harness off and left naked wires everywhere. Usually I would be easily able to hook up one of my aftermarket radios without having to even buy a quick connect harness. But this is pure hell. I have never seen this many wires go to the back of a radio. I know there is a factory amp in the trunk and there are controls on the steering wheel for the radio but i cant even find one 12 volt lead. Can someone please point me in the right direction. Could be a fuse blown but I have read that there are 3 fuse panels in this car also......fml! Any advice would be appreciated

This may help you.

http://www.the12volt.com/installbay/stereodetail/352.html

thanx but there are 3 yellow wires which are suppose to be the ignition. and about four black and white ones that are suppose to be ground. How would you approach this? trial and error?

Posted

I have inherited a 97 buick park avenue (big bodies Baby!!!)and noticed that the radio(factory) doesn't even come on.I did some investigations and come to find out that somebody chopped the harness off and left naked wires everywhere. Usually I would be easily able to hook up one of my aftermarket radios without having to even buy a quick connect harness. But this is pure hell. I have never seen this many wires go to the back of a radio. I know there is a factory amp in the trunk and there are controls on the steering wheel for the radio but i cant even find one 12 volt lead. Can someone please point me in the right direction. Could be a fuse blown but I have read that there are 3 fuse panels in this car also......fml! Any advice would be appreciated

This may help you.

http://www.the12volt.com/installbay/stereodetail/352.html

thanx but there are 3 yellow wires which are suppose to be the ignition. and about four black and white ones that are suppose to be ground. How would you approach this? trial and error?

Yikes...I wouldn't know. Trial and error I suppose.

First System

2002 Impala LS 3.8L V6, 128,365k miles.

Alternator: DC Power 190Amp H/O Alternator

Headunit: Kenwood KDC-BT945U.

Speakers: MBQuart 6.5" Comps, 6x9 3-way.

Amplifer: Eclipse 3322 on front 6.5 components, and a Infinity Kappa One @ 2ohm- 800w

Subwoofers: 2 REAudio SRX12D2 wired to 2 ohm.

Box: 3.1cuft box tuned to 33hz. sealed off to cabin

Big 3- done with all Knukonceptz KCA 0 gauge.

Don't drop below 14.1v at full tilt. :)

Posted

If you can't find a 12v, go check your fuse panel. If there's been bare wires chilling in there for a while one is bound to have shorted and popped a fuse or 2.

goodgrammarbc7.gif

10.x volts fo' life!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...