Jump to content

DC Audio 12" level 2, RF T400.4, RF 360.2


Recommended Posts

Current Equipment:

Stock HU

RF 3sixty.2

RF T400.4 (2 channels to doors, 2 channels bridged to sub)

RF T1652-S components (front doors)

DC Audio 12" Level 2

Update 6: Decided on and ordered new subs. Haven't arrived yet, which is ok I ordered them on Monday. Last page also now includes a picture of the birthsheet for my amp.

Update 5: got the new amp, check last page for pics and new vid.

Update 4: Just ordered a T1000-1BDCP to run a second 12" level2. That will allow my T400-4 to run my mids and highs. Box rebuild and adding second amp will have to wait till late May or early June.

Update 3: was graciously offered to TL my car by TECHFORCE when I visited him. I know the number is low, but please remember there is less than 300 watts to the sub, and less than 500 watts for the whole damn system. One thing to fix is the weird high peak HZ (60hz right now). A port change (and box rebuild) should fix that. ANYWHO, with the mic on the dash I managed a 130 even @51hz. In the kick I managed a 131.9 @60hz. Happy, though I am ready for the new box and port.

Update 2: bought some new RF components, T1652s. Should be installing tomorrow. Pics on last page.

Update 1: NEW!!! Here is the latest vid. I haven't updated this first post much so I will now. The original install was a 12" JL sub that was nice, but the new DC Audio SHIT stomps the JL. Anyway, here is a vid, of the current setup. Feel free to scroll through the pages to see the build and other vids!

UPDATE: vid of new mids and highs

First vid with new sub (sorry so dark)

So the subs are messed up, but the doors, amp rack, bass knob and fuse holder is done. Pics and a LAME video, it's 2 8s and they are messed so don't set any high expectations for this video.

Video: (video still has the 8s, no vid with 12 yet)

Pics:

Fuse holder

IMG_4149.jpg

Bass knob

IMG_4146.jpg

Amp (fits under seat)

IMG_4143.jpg

Doing work (well my dad was anyway)

IMG_4141.jpg

 

F150:

Stock :(

 

2019 Harley Road Glide:

Amp: TM400Xad - 4 channel 400 watt

Processor: DSR1

Fairing (Front) 6.5s -MMats PA601cx

Lid (Rear) 6x9s -  TMS69

 

Link to comment
Share on other sites

  • Replies 90
  • Created
  • Last Reply

love the bassknob, fits perfect. where exactly is the battery that the fuse holder is in the center console?

1997 Pontiac Bonneville Black on Black on Black

15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz

7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link

Blue Custom Trim

Blue Custom Fiberglass Rear Speaker Pods

Autotek Mean Machine MM2000.1

1/0 Knukonceptz KLMX

Rockford Fosgate Twisted RCA's

2 Audiopipe Anl fuse holders w/ 200A Kicker fuses

2nd battery (Soon to be an Odyssey D3100)

Dynamat Extreme Bulk Pack

Custom False Floor

15% Tint All Around

Custom Painted Stock Rims

My Build Log

Tailights

15" Lvl 5 DC T-Line Build

Link to comment
Share on other sites

that's pretty good work.. anymore pics ?

Thanks! Yes I have a few more pics, will put them up in a bit.

love the bassknob, fits perfect. where exactly is the battery that the fuse holder is in the center console?

Thanks! That spot really did work out well. Only one battery, under the hood. Battery ---> 250 amp fuse --------------------------------------- 100 amp fuse ---> amp.

 

F150:

Stock :(

 

2019 Harley Road Glide:

Amp: TM400Xad - 4 channel 400 watt

Processor: DSR1

Fairing (Front) 6.5s -MMats PA601cx

Lid (Rear) 6x9s -  TMS69

 

Link to comment
Share on other sites

that rocks man! i wish i didnt have all the heated seat crap under mine and i could do that :P

29yr3gg.jpg

Custom Car Audio

(815) 916 - 9194

www.midwestsplcustoms.com

2000 Tahoe | 22" GREED Celebrities

Alpine CDA-117

Dual 0/1 Runs

(3) 925 CA Group 31 In Back

(4) 18" FI Audio Q's (W/ Extra Spider)

(4) Hifonics BXi 2010D

Hifonics ZXi 4410

4 RF P1653 6 1/2's

Big 3

All Kicker/Knu Wiring

Link to comment
Share on other sites

Couple more pics. The pics of the amps under the seat here are before I built that little amp rack. I will get some pics of how it looks now later on at some time.

Amp with seat all the way forward:

ampinview.jpg

Amp with seat normal position:

ampnoview.jpg

Crossovers in upper glove box:

glovebox1.jpg

Doors:

door1.jpg

That is all for now and some of these I have posted before. When I start on the box I continue to use this thread.

 

F150:

Stock :(

 

2019 Harley Road Glide:

Amp: TM400Xad - 4 channel 400 watt

Processor: DSR1

Fairing (Front) 6.5s -MMats PA601cx

Lid (Rear) 6x9s -  TMS69

 

Link to comment
Share on other sites

that rocks man! i wish i didnt have all the heated seat crap under mine and i could do that :P

Thanks man! I am very excited I could fit the amp under my seat, nice and stealthy.

 

F150:

Stock :(

 

2019 Harley Road Glide:

Amp: TM400Xad - 4 channel 400 watt

Processor: DSR1

Fairing (Front) 6.5s -MMats PA601cx

Lid (Rear) 6x9s -  TMS69

 

Link to comment
Share on other sites

Ok here goes. I know, JL blah blah. It was cheap and not blown like my 8s. This is my first attempt at making a box that is something other than a rectangle. I should also mention I have no table saw or router, so circular saw and *gasp* jig saw. First flush mounting attempt and first false floor so be nice. I have no trim pieces yet but here is where the box stands now.

Blank wood:

blankmats.jpg

No baffle, in car:

Box1.jpg

No baffle, in car (different view):

Box2.jpg

Test fitting pieces:

Box3.jpg

Liquid Nail FTW:

Box4.jpg

 

F150:

Stock :(

 

2019 Harley Road Glide:

Amp: TM400Xad - 4 channel 400 watt

Processor: DSR1

Fairing (Front) 6.5s -MMats PA601cx

Lid (Rear) 6x9s -  TMS69

 

Link to comment
Share on other sites

i'm no pro, but aren't you supposed to put your in-line fuse within a few feet of the battery? i think that's y bellithorp04 asked about your battery location

Pioneer AVH P5900DVD

JL Audio XR525 CSi Components (Kickpanels)

Infinity Reference 6020cs Components (Doors)

JL Audio 12W7 Subwoofer

JL Audio e1800D Amplifier

JL Audio e4300D Amplifier

Link to comment
Share on other sites

i'm no pro, but aren't you supposed to put your in-line fuse within a few feet of the battery? i think that's y bellithorp04 asked about your battery location
Thanks! That spot really did work out well. Only one battery, under the hood. Battery ---> 250 amp fuse --------------------------------------- 100 amp fuse ---> amp.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.




×
×
  • Create New...