jayjay6888

max dimensions (i can go more if need be these are conservative) 35" wide.... 18" deep... and 16" tall subs up port back (whatever you recommend for the port but a simple slot port on the left or the right will be fine with me) oh and do you think that a common chamber or separate chamber would be better? appreciate your help

82xx XM-8212 DVC

ok sorry it took forever Current Box Dimensions (Outer) 30" Wide..... 15" Tall..... 18" Deep Port Dimensions 3" Wide.... 13" Tall.... 11" Deep 3/4 mdf no bracing or 45's and the its subs back port back slot port in center of the subs Subs are two 12" Koiilers their website doesnt say what to tune them to the only reason why i have them is b/c i got them off of a friend for like 50 w/ the box

yeah man i would appreciate that

sry about the double post

Ok I know that systems are loader when car is sealed up but ive noticed something with my system lately... with the window down even the slightest bit lows arent as deep as they are with the windows up... i have a prefab box for 2 12's its pretty damn big(maybe a little to big) and it has a slot port down the center... could my tuning be off for the subs b/c i know that prefab boxes are usually tuned high and i know that mine is tuned high just not how high because the lows in "White Girl" just roll off and i can hear them but not feel them..... if measurement help i can get some or can you direct me in the direction of a formula to calculate box volume and tuning Thanks

lil john kings of crunk?

i believe it cracked the windshield all depends on how old that car is because i cracked the windshield in my old pathfinder and my system consisted of two 12's and a zx 750.1 all it takes is for the seal not to be tight now shattering the window like in some of these insane installs is another story... also didnt help that i had no dynamat what so ever and the car was almost 14yrs old

but its not listed as driverside passenger side in the computer where i am going to get it? so how do i look at it since its on my driver side left or right (all depends which direction im facing

i got a code for my O2 sensor 2 bank 2.... im not 100 % sure but i am guessing that bank 2 is on the side with cylinders 2,4 and 6 (V6 motor) and O2 sensor 2 would be the downstream one after my cat right?

if hes talking about the custom wire that is like 220 for 100 ft.... then i the description below it tells you to call this number to get a different price per foot. i just called but the sales person was out of the office

did you get it from the coppercableman on ebay?

so if i run 4 awg to my T10001bd with a 100amp fuse would this be a bad thing? i could i get by fine?

and how much a foot is that 2/0 ?

is the KnuKonceptz Fleks wire the best price per foot online for 1/0 because i need to buy around 20' soon since i just got my new amp where are some other place that everyone else get there wires from?

id love to here this when you get it hooked up may help me make my decision on whether or not i want a Fi Q or a DC lvl 4...

no the power light would turn on without the remote wire.... b/c if you turn you head unit off and then look back at your amp it will be off so double check your remote

how do you like that that powerbass? do you think it is putting out rated power b/c i was looking into getting some found some decent prices... and where did you get yours?

what makes is suck? its correct right?

fuel filter guarantee it... How man miles? if its close to a hundred thou. switch it out not a hard fix and it isnt costly ..... filter will be less than $20 and u should be able to do it yourself get a haynes manual to find out where it is located more than likely near the the gas tank with two small hose coming out one on each side

how big is that enclosure? 15's right?

no one of the brackets that holds it on the window (not the beauty plate) the assembly

what type of glue should i use to glue plastics b/c one of the mounts on my third brake light broke and i need to get it fixed because it is dangling

Does anyone know of any sites or auto stores(advanced, napa, autozone, pepboys) that sell third brake lights? because i was bumping tonight and looked back to see that it had fallen... im going to try and fix with some kind of glue any suggestions on what to use for plastic im thinking it wont hold but i'd rather try and find out then pay out the ass for a simple 3rd brake light

i could be a lil late but someone one youtube has been reposting alot of your videos under his account... unless you made another one named T15K?