Coop99

Thank you for the advice, ill definitely give it a shot. Sorry I didn't mean to come across as ignoring you. I was just replying to the other guy. I will have to get a dd-1 and test it. Thank you for the help, really appreciate it.

I took the Rms rating for my subs (3600) and multiplied it by the resistance (1 Ohm) and then i found the square root, which was 60 volts, so i used a miltimeter and tuned my gain to 60 volts. and the series parallel is where I wired my subs in parallel but they are connected to the amp in series

I have 2 PSI Platform 2 12's at 1800 watts rms 1 ohm powered by DS18 Hooligan 5000 watt rms amp to power them, I used to have Soundstream arachnid 8000 watt max 4000 watt rms until it crapped out. Pretty sure it lied about it's output but could have been user error. They are run in a series-parallel circuit. The box is 4 cubic feet tuned to 40hz. The left sub's cutout is a little small so there is a little bit of air leak coming through there. the speaker wire is 8 gauge and the power wiring is all 0 gauge. I have a line converter as well. They've start to smell funny when I turn up the music