Jump to content

OldsBoomer

18+ All Access!
 View Profile  See their activity

  • Posts

    3564

  • Joined

  • Last visited

 Content Type 

Everything posted by OldsBoomer

  1. OldsBoomer
    o damn yea i hear ya there then Good louck with that mine is easy to get to right on top on the engine....4.3 vortec
  2. OldsBoomer
    no prob man cuz my boys blazer with 2 18" Mayhems on a AQ 3500.1 slams loud... not mic loud but ear crazy loud and the box is like 13 cubes
  3. OldsBoomer
    for 60 i'd just let them do it
  4. OldsBoomer
    hmmm ok well just my thought cuz they can take some serious power
  5. OldsBoomer
    why so many layers? you shouldn't need all those layers just use some wooden dowels or all thread so you can get more air space. with that power you'll need about 4-4.5 cubes after displacement per
  6. OldsBoomer
    first off do NOT use bass boost its just plain old clipping waiting to happen second you did it right jeff set the hu to just below clipping which is typically 3/4 volume but it may not so set it below clipping then do you amps's gain with the knob all the way up. also i believe some filters can cause clipping not sure on that one i think i heard that somewhere
  7. OldsBoomer
    your going to have a box rise change at every frequency. as it looks most likely lower rise at the frequencies you were trying
  8. OldsBoomer
    not really man subs dont peak your box and vehicle do
  9. OldsBoomer
    well i'd like to see how those amps were set then. I bought my Aq3500.1 off a guy who had an spl wall setup and burped 2 AQ HDC3's with copper coild on a pair of strapped @ 1ohm AQ3500.1bds just saying copper will be more musical too your not running to much power also you did state this was for spl.. obviously for daily the more motor force and motors to spread the power out the better usually
  10. OldsBoomer
    your subs do not peak at 50hz. 50hz is where your vehicle peaks with your current setup
  11. OldsBoomer
    why? copper is stronger for spl the aluminum coils would be better for high power music setups. they disapate heat faster then copper
  12. OldsBoomer
    hmm below 500 why not port 2 15's? and Aq HDC3 18 can come in dual 2
  13. OldsBoomer
    set the gains properly and find your peak frequency. Find a Test tone for that Hz thats about 30sec, play it starting at a low volume. Then roll into it(turning up the volume or gains knob). You just burp your system
  14. OldsBoomer
    what makes you think that it only comes in dual 1? and a AQ 2200 is good on Crescendo 3k just over 500 so
  15. OldsBoomer
    get some of the SDC series subs from Aq and do it sealed like four 15's should be louder then what your looking at
  16. OldsBoomer
    no one?
  17. OldsBoomer
    what are your goals for your setup? in a trunk im guessing?
  18. OldsBoomer
    who tested it? most company's cant test alternators right
  19. OldsBoomer
    ASA 600.4x or the Crescendo amp pm me what you got
  20. OldsBoomer
    thank you
  21. OldsBoomer
    yup i hate MOST shop work there are some good shops just not many do good work
  22. OldsBoomer
    buy one and do the work properly like your friends most likely haven't and you'll be shitting on them
  23. OldsBoomer
    If you want to get the 1500 get it just dont clip and build the box propely i had my Aq 2200 on a single Fi Q 15 old style with bp power at one ohm with out one problem with power handeling. build the box to about 3.25-3.4 cubes after displacement and port
  24. OldsBoomer
    Hey i had to wait for the other stuff that happened so your not the only one but i realize they're busy and they took care of me so no worries on my end
  25. OldsBoomer
    call the AA sales line. Fi and AA are in the same building
×
×
  • Create New...