Jump to content

bhirst

Members
  • Posts

    61
  • Joined

  • Last visited

About bhirst

Profile Information

  • Gender
    Male
  • Location
    Spokane, WA

bhirst's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. Ok. Once you have that you should be able to find a manual pretty easy. If not post it here and I will see if I can help out.
  2. Like said above it has to be the bypass module. If the security system detects a start up that is not authorised it will shut it down. The check engine light is most likely a false key code being thrown.
  3. That is the remote model number. Do you have the actual alarms model number?
  4. I built my mold out of a foam block then fiberglassex if and took the foam our. Then fiberglassex it into the dash piece and wrapped it with vinyl.
  5. You need to use a bypass module for remote starts. If you run just an alarm you won't need a bypass module because the factory security system will not need to be bypassed to start the vehicle. On some vehicles and bypass modules the bypass can communicate with the vehicle to monitor and control multiple options creating a faster install. As for the door locks some lock systems requir different outputs which is why they sometimes need to run extra relays.
  6. PAC IS76 plugs into the iPad then put a LC-1 before the amp. The LC-1 is a "bass knob" that is inline of the RCA adjusting the output to the amp. It's really simple to set up. I ran 2 LC-1s. One for volume and one for the sub output.
  7. I used the PAC IS76 pro for my iPad install. It gives you 5v RCA output just use a LC-1 for volume control. Use y splitters to send signal to a 4 channel amp for the speakers and the a amp for the sub.
  8. That is how alarms work. Basically alarms tap into factory wires to monitor, manipulate, or use.
  9. Thanks for the comments. I've spent a ton of time on this car and just started to advertise to sell it so I can justify my other projects It is a polished turd but it's a bright shiny awesome one haha
  10. It is nessasary to sand it down to bare metal. Perferably grind it down. It will not stick well to paint. If you want something that will use a polyester putty but even that needs sanded and it is not recommended to use thick layers.
  11. Nice upgrade but I would recommend getting some projectors for it... They are going to give you a clean cut off line while driving so you don't blind others on the road and also it will make the front end stand out more.
×
×
  • Create New...