Flipsid

Going good man. Those ports do look rather tasty! Wish I had time to ride out and help you guys out some, but my azz needs to get back at it here.

Looking good Steve as always. I wish you would bring it out to the east coast one time. I'm all about the clean installs and this one would be cool to see.

Few update pictures: Got 8 resin coats over top of the Rage Sanded down the resin coats Primer on the wall Painted up Still tacky and some dust got by my tape so just gonna wait til tomorrow before I start putting the front back together. here is last pic of amps before they all go back in tomorrow Sexy!

Derrick came down yesterday and hooked me up by using that round-over bit he has I got the front wall Raged out and ready for sanding Charlie started fixing the holes on the roof were we took the roof rack off I got the wall sanded down and a resin coat on ready for sanding and painting in the morning

Nice job Derrick! Think I will be down some time tomorrow I'll call ya

I figured that the bass will ulgy it up soon enough thanks^^

Got some work done today! Ripped out all the equipment and wiring in the rear. Then me and Herold installed this That's all for now. Get the amps installed back in tomorrow.

only goal today was changing the rear to fit 16 more batteries. Its going to be tight but everything on this build is tight.

haha thanks for posting up the pics and vids... still cant get over all the fuses blowing. Just goes to show how beastly the 3500D is. the bathroom vid is just retarded!

haha.... shh telling secrets

Also need to give a big thanks to Mike Singer and his guys coming down and throwing in a helping hand on this and also letting me "borrow" some new equipment of his.

ahh yeah thats cool.... They should be back to Ohio and have em up later today. We also gotta figure out if we can bypass the fuel roll over switch.

It was at 34hz... when we did the test it was saying 35hz but we didnt have 35hz we had 34hz and 36hz so we just stuck with 34hz but everyone on outside thought we were doing 35hz. I'm still tripping on our little fuse problem. Anyone have a pic of that I thought i got one but can't find it...lol

and it has the right equipment in it!

We have a lot of things to do before I want to turn it up full tilt. really have to get an outside radio source to be able to control the volume knob. With those few test it took two of us trying to hold the radio on the inside. So much vibration it was all me and Brandon could do to hold onto it enough to get it turned up to that. Still need to finish the doors and the wall is not finished just squared up corners right now.

I dont have any more right now... more to come in the following days/weeks!

go back on these pages for a little build log... and I soooo don't have the "good" numbers on this cam... I think everyone else does. They are more then welcome to post em up ... I'm uploading more vids that I have... I don't have any vids from when i was inside. We still have not even come close to full tilt yet. Still much work to go before we even get close to that... just some teaser numbers..... will have it ready soon and yes its might have some numbers in it!

Really have to send out a big thanks for everyone coming down and helping get everything playing. We have had some hardcore problems as every big system does and without these guys it could not have been done! Thanks a lot guys, thanks for being a part of this "little build" more to come in a sec

This is Derrick and Robbies build here. DJ is doing 36-12's. Looking good so far Derrick. That port is a classic now..... need to get that in my sig haha classic

I cant wait to turn this truck up today. Its been a long time coming. We will be keeping the numbers to ourselves for a little bit. This will be something that will be seen in the lanes. Not sure yet which show will be first.

Ok here are some vids of the first time firing up the system Just some test vids..... no numbers yet, those will come later

thanks, I can't wait to get to testing. Me too man I will make sure to vid from first turn on til full tilt test Thanks, we have had a lot of help from everyone on this build. Me too, me too! Going as fast as UPS can go! Make a trip down lets finish this up!

OK I know its been a long time but please understand I'm a pool guy so summer time is busy as hell for me. So here we go with some update pictures. I would also like to thank Brandon from Sundown Audio for coming down this past weekend to lend a hand on getting some work done. Dropping in or should I say pressing in some subs Dont ask how the hell I got in there like that Brandon working on "old school" amp racks amps amps more amps Some under the hood work Some Powermaster batteries Getting very very close best for last enjoy Tunnel of Death!

That was me up at the gas station in Chapin. We are so close to being done on this build its driving me nuts. But work comes first and my job is no 9 to 5 so time has been my only issue right now. I need a clone to finish this work up or a big group of people come help me finish it up (cough) DJ, Jacob, Brandon, Derick, Rob, Gary, Scott, Steve.......ect.! lol

Looking good 80. I always like the work you do man. More pics and updates^^