troy

well that sucks. i couldnt find one a few months ago for anything under like 2 or 3.

1000 for a runing car in god condition? idk good luck though

probbably the dumbest thing ive seen in a while. but it is funny

last chance. i know nobody wants these though

i have the mid on like -4. im not using an amp on them. ive heard of putting dynamat behind them in the door helps out. should i try this?

someone knows something. msinly just the vocals that distort.

slam that thang

my mids soound like ass as high volume. they distort horribly. any opinion.

i was wondering if there is any simple mods to be done to a 1998 grand prix 3.8 to get more performance. preferably cheap

i know people have told me that they do around 900 if not over which is plenty considering i only need 800 out of it.

the kenwood is cea compliant which means it does rated. but i do think i am going with the hifonics.

any specific reason why?

walmart sells them for cheap. if walmarts not your thing darvex and likeeveryother audio website has them.

• 1800 Watts Maximum Output Power with 30% Smaller Chassis Size • 500 watts RMS x 1 at 4 ohms (900 watts x 1 at 2 ohms) • 1-ohm stable (output regulated to 900 Watts) • Variable low-pass filter (50-200 Hz at -24 dB per octave) • Subsonic filter (15/25 Hz, 18 dB/octave) • Class D design • Fuse rating: 30A x 2 Super D-Class Monoblock Amplifier RMS Power Ratings: 1 ohm: 1200 watts x 1 channel 2 ohms: 900 watts x 1 channel 4 ohms: 450 watts x 1 channel BXi AccuCross™ active electronic cross-over permits full adjustment of: Bass EQ, Subsonic Filter, Low-Pass & Phase Shift features Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output ±18dB Variable Bass Equalization @ 45Hz 180° Variable Phase Control (15 to 35Hz) 80 amp fuse rating

to fit 1/0???

i can solder them but the largest terminals i can find around here are 1/4 inch terminals form autozone. Idk if they are large enough

i know some one has some

whats price dropped to?

as long as you have a solid ground it will not benefit you at all. if yourground is weak then gor for a ground to the bat

title says it all i need a anl fuse block for 1/0 wire

in my experience no. it is a waste of wire as long as the big three is done right

pic in second

yea actually i am tying to sell them

5.00$ shipped.