Pioneer~Saturn

I really like the XXX series of Soundstream amps and subs, Fi subs are a solid choice, XS power batts ftw, mechman alts, knukonceptz/kicker/stinger wiring, Alpine for headunits I love mine so far, accessories I'd have to say stinger, and for speakers I dont mind my Rev-series comps from Pioneer, they get the job done.

Haha, I was actually thinking about doing some wild color and like a crazy metal-flake paint job but I just dont know...I really dont want it to catch someon's eye walking by in a parking lot etc. I think if I do paint it, it will be along the lines of colors in the car so it doesnt quite jump out at you...we'll see

Fairly coarse thread, but any size that you have a bolt for

Yep, stormcopper.com is the shiznit...I always go to them for my copper, they have almost everything

Good luck, will it be for the truck?

Pretty much anywhere, yea...both those will have it back near the epoxy's, glues, etc.

If you have large, unsupported walls a nice thick layer of fiberglassing (with mat) will help out there...but if everything is stout and supported you could do a nice smooth coating on the inside to seal everything up n such

Diminishing return applies with pretty much everything...sad but true

Id rebuild but for the time being lay some glue and clamp/screw it together...

x2 Beast

Yea, that looks like it should be a doozy

Looks like thatd work

go to export...then 2D model...save it in there...then upload with photobucket

And I just ran some math and a 37" long port that size, while keeping it 8cubes net will get you 29.789Hz tuning... So if you have the space to maintain 8 cubes net, and can get a 36-37 inch long port than that would get you a 30Hz tuning about

Well if you'd like I'll be at my home computer later and can tell you how long the port will have to be and model it up on Sketch-up for you

^And that's assuming youre making it longer inside of the enclosure, which would take up airspace as well...if you make it longer outside of the enclosure it wouldnt have to be so long because it wouldnt be taking up airspace the longer it gets

I would say a good amount...not just a couple inches, like over a foot or so

Yea, it shouldnt change much at all unless youre over 2" off, but even then it wouldnt be a crisis i dont think

35.02787 Hz

"my amp don't have a gain knob, it's got subsonic filter, low pass filter, Bass EQ, Voltage 0 to 14, and some other thing that I don't have the tool for. Also Phase. Even if I did have a gain i wouldn't turn it all the way up cuz my old amp had a gain." ...that's your gain, if im not mistaken

Very nice Specs on enclosure?

I'll be there Who else is comin?...c'mon

Yea, I was thinking about paint as well...but idk what would look decent, I dont think I'd want a shiny paint job on it though

Yea, I can see where your coming from..I may give it some thought At first I was worried about spray-anything due to it being installed in the car but Im going to be removing the rear window for the build so it'll be out of the way...I could tape off everything and see what I could do possibly...hmm

Well it'd be some support yea...but the outside of this is going to be getting a butt-load of fiberglassing to add support (as well as the inside, it'll be fiberglassed as well). And thanks