Explosivesound

No, its for my wifes car! Weve got two cheap subs for her!

I dont know if it matters but the earthquake has 3 25 amp fuses and the memphis has 4 40amp fuses?

I can get either a Earthquake PH2000/D1 or a Memphis 16-PRD1000.1 right now for a heck of a price. They are both 1000watts rms @1 ohm which is how I would be running it. Which one is better?

I dont know specifically but Ive heard they are very similar to the T3 TSNS

Ive seen that one. They try to get the bass to "pull the trigger?" Thats the episode that they smoke two MTX jackhammers!!!!

Workin here in Oregon on my temp. sub box. along with some body work, getting ready for paint!

I would if I had more money but I already have the MDF and I just finished body work and need to get paint. I will remake the box in the future as Im getting a second 18. I think then I will go with the birch!

I guess ill go ahead and do the 1.5 with 2.25 baffle and run a brace from front to back and top to bottom! 140db @29hz. from 1 12 is amazing! I would be happy to do that with my 18 APX! Thats what, equal to 2 12's and its the next model up! Maybe Ill get better numbers than I thought I would. My one downside is I have a 4 door. Sub enclosure will take up 90% of my back seat but I have a feeling those four doors are going to leak a lot of air!

The other thing I like about the 3" is my enclosure size. Its almost a wall in my backseat If I go with that but if I go 1.5 the enclosure is quite a bit smaller. I figure if I go bigger thats less cabin space! Not too mention its just about unstealable!

Just about finished on all my body work. Getting ready to have my car painted now. What paint should I use? House of Kolor, Dupont, or PPG? This was my first time doing body work but my uncle whos worked at a collision center for about 20 years came behind me to make sure everything was perfect. After all the work thats been put in (there was a LOT!) I want to use a quality paint. Ive had one car custom painted with Dupont Chromabase, but I have no knowledge in paint brands. Any opinions appreciated. Thanks! Oh, it will be a urethane basecoat/clearcoat!

the 3"?

Im building my sub box but I dont know how thick to make the enclosure. Sub is 18" Atomic APX. Will be 6cubes net @32hz. How thick should the box be. I was thinking 1.50 all around and a 2.25 baffle. But I can go 3" all around if need be. Although it will be awhile before I run the reccommended 5000rms in the meantime Ill be running about 3000rms. I was told by another guy his AP(one step lower than the APX)12 Was still flexing his box with the 1.50. I will not be glassing the inside of the box so should I go 3 all around?

Get these http://www.amazon.com/gp/offer-listing/B00...mp;linkCode=asm This is the T162S which is much better and is the same price! They are neo motors!

I had the Type S and they were absolute garbage. NO midbass at all. Go with RF!

Have you seen the youtube vids. of the X scream and the insanity and Big shot on the stratosphere. If not you should check them out!