fox_racin4

i was going to go with dual 0.7s but decided not to ....yet probly on the next recone i will tho to help imp. rise haha

ill probably throw the other amp in later today they only got warm when i was burping them for over 30min but it was probly dirty power... for just under 800 for the 2 fresh reconed subs im pretty happy with them

just a small vid of the current build.... not the best box but its a temp box i had layin around i thought i would try out amps wired to 1ohm as well so subs are getting about 1500rms each i might toss the other audiopipe 3k in tomorrow and see what itll do subs need more then 1500 to get moving tho thats forsure!!

VID!! camera didnt pick up very much flex but the whole car flexes quite a bit already on 3k subs are begging for more power to might toss the other amp in tomorrow and see how it is!!

need some woofer porn.....

one word : GRILL!!! i see somoenes foot going threw your cone in the future

your port looks like it snot far enough from the back wall of your box

so this is only partly done... its only on 3000rms ina temp box thats subs up and port side so.. with double the power ill gain roughly 3db plus a better box firing forward.. i see the 150 goal being done! pics of numbers! ( clickable ) on music 1st run no tweakin after some tweakin and messing around scores at 32 HZ door open 32 hz burp door open 33hz burp

alright so... got it up and playing but only on 3000rms so far and holy dam! i think its louder then my 4 10s in the 6th order were... deffinatly surprised me when i first heard it will have to get a vid of all the flex, the trunk has a good 1/2 - 3/4" of flex all doors flex quite a bit.... everything inside flexes if i get out of the car with it playing the back of the seat will adjust itself and this is all just thrown together... no testing a temp box on half the power i plan to run woot!! no pics of todays work will get a vid tomorrow!

picks are clickable!!! click on them...they get bigger haha i do it so ppl with slow computers can load a page without the computer freezing

lil update and more pics!! got the doors amped today...wowww what a differance in SQ ive lways ran amped speakers but so i had some tunes till igot around to amping them it was just running off HU power till tonight ( if that makes sence? haha) got batts in the back wire up made an amp rack in spare tire well to hide it and save space all thats left to do is put subs in the car i have a temp box ill be using till i get around to building another one will still need to switch front batt out and then find a HO alt for the car then all the testing to follow till i break the 150 mark! pics! the car will be sitting much power once everythings in to hopefully the insane wheel gap is gone but i think ill be bottoming out exhaust quite often!..ill have to get a sound clip of the exhaust.. sounds nice

i always use a sawzall...works great!!

well... the new build has started last build was in a 1994 cavalier that is now gone... ( blew it up...) equipment deck : pioneer 5900 speakers : infinity kappa 5 1/4s and MB quart 6 1/2s in front doors subs : 2 DD 9512Fs speaker amp : kenwood 728s sub amps : 2 audiopipe AP3001Ds box : to be assigned....but will be a fancy box to say the least wiring : 2 1 gauge runs to the back alt : stock....for now batts : 2 redtops and 1 kinetic hc 1800 not many pics right now only got deck installed wire half ran to back seat and front speakers mounted into doors subs will be firing forward in possibly a parallel 6th order bandpass since the pics ive cut the steel out to the black line you see so back seats will still use mounting tabs and everything will just have a bigger opening to fit a bigger box in ( for now box will be 15tx36wx30d ) i still need to get more power for amps.. that will come eventually kinda a slow build but will be done shortly other then alt/batts my goal is to get a 150 burp atleast pics!!! none of the car yet... lolz

yes... but if its so stuff it bearly moves and its rated for say 1500 and you give it 1500+ right away i for-see spiders tearing or something along those lines i have 2 fresh reconed DD9512s ill be running 3k each to ill be loosening them up a little with 2000-3000rms for a week or so just to be safe..

ive always went easy on mine for the first little....giving them rated power then after a little just playing them normally

2200 rms to 2 level 4 18s what year cavalier?

how will he hit the coil? get something non magnetic stick up the pole vent and push the dust cap back out or the needle trick will work just take a SMALL dab of superglue or something and cover the hole you poked will be good to go

they do run 1ohm fine mine didnt even get warm

the AP30001d will run at 1o hm if you can keep voltage up...ive done it with both of mine

deffinatly forgot to pull my shims out today while me and a buddy were reconing my subs... thankfully glue wasn't fully cured and we were able to get them out!! haha

sign up on here man http://teamassholespl.forumotion.com/

wtf happend to the sub?! lol

its a 9512 i bought 2 half blown 12s... ( surrounds ripped to shit spiders ripped off landing broken leads... but still worked) for 300 cnd then spend 350 cnd on recones/baskets/shippng and then 95 on brokerage and then another 50 on glue so 800 total for 2 "brand new" DD 9512F's with G baskets not bad i dont think!!

new pics!

all purpose goop!!!!