alman101

When are these going to be available for your northern neighbours in Canada?? Thanks, Alex

Ok so I recently picked up 20sq feet of reg Damplifier from Wheel Class(only place in Ontario) to get rid of the aweful rattles in the trunk of my car. Here are some pics Let me tell this stuff works awesome, my lid now rattles very minimally, I have a before and after video of tapping certain spots. I would have included a before and after for when the bass hit, but I blew my subs half way through the install so... enjoy Let me tell you, being 6'1" and 220lbs, it was so hard maneuvering in there haha

Anyone have experience with the amp at 1ohm? thanks in advance for any help

I set the amp up so the woofer wouldn't bottom out, with the gain at 3/4 and the bass boost at 12of12 it was bottoming out, I turned bass boost to 6of12 and it stopped.

heres a little vid I wipped together

haha its definitely a fixed up woofer. The original surround "ripped" so I put the surround from my alpine type S that I blew before.

heres an update, went ahead and made a vented enclosure with the MDF I had left some specs on the enclosure are 1.3sq ft and tuned to 35Hz, this thing moves air here it is in the back seat (not permanent place) a new video will be updated within the hour

I am unsure what to do, I only have a 4ft x 4ft slab of MDF left. I can either make a ported box with that or wait 2 weeks for my next pay check to go get another slab at RONA.

It has the same "rattle" but not as violent I believe it was 0.9cu.ft sealed and 0.6cu.ft ported I took the port out and I think the sound is coming from the woofer itself or something else inside, I don't think its the port anymore

ok thanks for the info, i will take out the port today and cut it down a few inches, its a 9inch PVC pipe, ya i know ghetto

Its not, it sounds the same with the gian at 1/2. I think its my port but I'm not 100% sure And if someone knows how to embed the video that would be great. I cant get it to work

I know it got deleted and now I need help with a problem

And heres the next victim... And now heres the finished product with a little problem...

I made a 4th order bandpass a few months ago, and ended up blowing the sub an hour after its maiden voyage... Here's the build from the beginning

lol ya maybe a recone, or might buy a type r or somthin to pull the full 500 rms out of my amp