fox_racin4
-
Posts
5124 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by fox_racin4
-
I need to doors closed to demo, 1. It 6758 times louder and 2. Subs unload quick with doors open Thing is it never did it before, and the HZ area it does it in is where i bassrace...lol
-
I need to doors closed to demo, 1. It 6758 times louder and 2. Subs unload quick with doors open Thing is it never did it before, and the HZ area it does it in is where i bassrace...lol
-
ill try to get a vid of it.. it seems to be 3 or 6 of the subs behind the drives seat, kind of hard to watch all of them hahaha anything in the mid 40hz area will do it.. gotta run out for a bit will try to gets a vid!
-
never did it with the SA10s tho!
-
Ok, have an odd problem i need some quidance with... Playing the subs ( AB XFLs ) and songs that have notes in the 46hz area ( lil jon push that, The higher note in no hands) The subs behind drivers seat will unload. They do it with and without the seat in the truck. Any other notes are fine as far as i know... Tried re-wiring the subs, switched amps (switched leads at amps) Im out of ideas
-
haha yep.. i need a shorter belt but cant find one.. it only slips when i load the alts down tho
-
No.... Its a very common problem
-
If i had more free time Id say get te wood , and a table saw And lay my gas thre and back and id help ya
-
im not to far i dont think, im a few min from detroit, in Windsor eh
-
If you know what your doing...yepp
-
Dont make me drive to OH!!! I seen JB weld, But then he said weld With no JB infront of it.. And me being a welder When i see weld i dont think of jb weld lol
-
i dont think welding a magnet would work to well....... IIRC heat and a magnet dont mix..
-
bumpp
-
Tried, mobile fail Haha
-
can get it decently cheap BNIB fully loaded just dont want a paperweight
-
may pick up a UFO style BTL with the single slug ( NOT the 4 smaller pie shapped slugs) and it has a carck.. IIRC they were known for cracking which is why they switched to the 4 pie shapped slugs, what glue can i use to just.. reinforce the crack?
-
cylinder sealant.
fox_racin4 replied to MIKE-2U's topic in Engine and Performance - Anything for that couple extra horses!
Sounds like you need a can of compresion. But really.. Depending on whats going on the "liquid" your looking for will only do so much -
Budget is rougly 150 per Buying 12 200$ subs isnt cheap lol
-
Ive got an old school CV stroker pro 10 the one with the pole and adjustsble top spider Needs a recone tho The lv3. Subs are nice I used to have 4 of em lol
-
I started with 6 10s on an aq3500.1(new one) then 8 10s on a saz4500 Then 12 10s on a single 4500 Then got another 4500 Was going to run 3 4500s but wiring would have been a bitch sooo i juat got 2 more 4500s to make things easier
-
Lol yess tends to do that haha i cant even get to full tilt because the sa10s wont take the power mechanicaly On my sub volume ( goes from -24 to +6) I have gains set for the sub volume to be at 0 And i cant bring it up past -10 haha
-
will not be adding more power... 20k is still more then enough cant even turn it up yet with the SAs lol the D1 Fi coils would put me at .94 strapped id like to stay with D2 and be at .7 strapped
-
Ok so i was going woth Fi but, since their D2 coils acctually read D1.4 that will pute at .4 strapped... A tad low for daily So im looking at the xfls now and waiting for some info back on some other subs as well
-
If all measurents are the same, yes Coil depth in te motor could be differnt, spider landing to surround landing could also be differnt
-
killed a level 6 coil
fox_racin4 replied to gredysra's topic in DC Sound Lab - Big Bass on ANOTHER LEVEL!
I set my gains with the DD1 same tone you used, and im running 1500rms+ to a SUNDOWN SA10 DAILY But the differance is i know when to back off and let shit cool down..
