just1moreamp

I used the damp---not the damp pro

How much Damplifier do i need to put on the roof of my explorer i have did the FILL&SEAL on all the braces and did one layer of Damplifier on the entire roof do i need to put on 2layers are will one be fine, I here the roof is weak on the explorer, is there anything els i need to do to it

That set is about 4/5yrs old if you had the tweets that would be nice. and i think thay are 75rms at 4ohm ea.

Had a kid f---up my mustang-1990-GT 3yrs ago thay keyed it and when it come down 2it thay take 3estimates and pay you the lowest of the 3 thats how the juge did it, still cost me $675.00 out of my pocket so just check your laws there b4 you let them f--- you over, And you have a nice car and a nice install going on 2.

How much for the--TPFDB-4PG block and the PAC PF-2 fan shipped to----75938 thanks

you did what to your stock alt,, to make it a 220,, who makes the rebiuld kit for that,

How much if i pick it up from you in h-town

I am looking for some Deka 9a31s if you have any for sale -pm- me with what you got and how much i need 4 of them thanks.. and shipping will be to zip-- 75938,,

I did put a Electri fan on it when i put the dual alts on it. you dont have to do that for the kit 2fit but you do have 2move the batt.

the belt i got was 2short but i will get a new one saturday,, the 2alt is wired in to the 1-one with MLA in line so i get 15.5v--15.7v with it and the first one has a MLA on it but i only get 14.9v-15.3v on it.. yall let me no what yall think of the dual alt setup. i have made 3more of them up just in case someone needs one..

you must have the 4.0-sohc explorer and yes you do have 2move the power steering resovoir on that one--i have the 4.0-ohv explorer and i just had 2move my batt i just turned it sideways, i would like to see your dual alt setup on your explorer with the 4.0-sohc.

if you wont to see what 2alts look like on a 4.0-explorer send me you cell-ph and i will txt them to you.. its done and its badass,,who dont wont 2alts on the ride, i love haveing a 270amp and a 200amp alt on my explorer.

Had some time 2work on my dual alt kit 2day got some work done any one wont 2see... its not done just yet but i am very close..

I am looking for a good 4ch amp to run 8--6.5'mids something like 75wpc at 4ohm let me no what you got and how much shipped to 75938--thanks

what motor do you have 4.0-ohv--are the--4.0-sohc

If any of you on here have a ford explorer with the 4.0-ohv in it and wont to put 2alts on it and keep the ac let me no i am almost done with my dual alt kit that i made for my explorer if there is some explorer oweners on here that might wont one let me no i might try and build some for you. when i get it all done and painted i will post pic of it for yall. this ant a for sale thread just trying to see if there is anyone that might wont one when i get done with mine.

So 2day is my B-day and i ant doing shit but hanging out with my son rideing 4wheelers and haveing some fun with my son 2day,,, 2day is 5yrs for SMD one hell of a forum,,,my hat is off 2you steve----thanks for haveing us.. I f--- that up you see whathappens when you have to work 14hr on your B-DAY then drive 3hr to get home 2spend your b-day with your son,,,

Is that alt off a 4.0ohv explorer. how much shipped to 75938.

I have a IA20.1 it ant no aq1200 or sax1200 but i think it will power your sub justfine. pm me

So would i be better of useing some pvc pipe for ports i dont wont to do any bends in the port. i wont to tune to 30/33hz so could i do like some 4'pvc are some 6'pvc -idn- shit about porting and tuneing a box.

what i am trying to do with this box is have the port run alone the bottom of the box so i dont have to make any turns in the port-like a---14'wide 4'tall 11'deep--- port so i dont have to make any turns with the port. can i do it this way and get the port vol i need without the port being longer than 12.5'deep. thanks

So this is with the port on the bottom of the box from side to side are what. i need the port going along the bottom floor of the box. thanks

Its going in a ford explorer---max is-41'w-17'tall-20'deep i just cant seem to get it right every time i try its wrong. thanks for your help man.

I have tryed it and cant get it to work for me-idn-// so you are saying i need more port/ i wont to stay around 4cf with the box. boston g5-12' need 2cf ea and tune to-30/33hz is what boston website said to use.

I am trying to do my first ported box design bymyself here so tell me if this sounds right to you guys. the box is 41'w 15.5'tall 15.5'deep- outside.subs up. my port is at the bottom of the box and it is 3'tall 12'wide 10.5'deep-tune to 31/32hz i think. do i have enuf port in this box. I am runing 2-boston-g5-12'subs in this box.any help on this would be nice good are bad just tell me what you think...thanks