dragon breath

anybody else?

i need to recone my audioque hd3 12 (not hdc3). my current setup is a 2.2 cubic foot slot ported box tuned to 38 hz and a amplifier that makes 1500 watts rms at 2 ohms and a dual 4 ohm copper hd3. option 1. stock AQ recone, dual 4 ohm copper voice coil with 8 soft spiders. option 2. fix my speaker.com team PSI recone. they recommend a dual 1 ohm flatwound aluminum voice coil with 3 stiff spiders. option 3. AQ aluminum coil recone, dual 1 ohm AQ aluminum coil with 8 spiders. they can add extra spiders if requested. which is better for my setup? the only reason i need a recone is my subsonic filter got turned off by accident and i bottomed out my sub hard enough to tweak the cone.

x2

x2 on the audioque aq1200d.

i meant a real hobby shop, not hobby lobby. real hobby shops have about 10 or 15 types of CA for different things. ( i mess around with rc cars too )

CA glue and activator are available in any hobby shop.

i fought a ground loop on my dodge avenger for about a week. i finally figured out it was the antenna . the mast grounded on the rear fender and the cable was like 13 feet long. i ran a wire from the bottom of the antenna to my amp ground and that fixed 90% of it. i then grounded my headunit to the same spot and it was finally quiet.

i do not think that targa is sold in the U.S. anymore. i know i have not seen anything since the mid 90s.