donellk

This sounds perfect to me! Most 8s don't need a lot of air space .5 will be great! Plus 8s don't normally have super low fs and I normall tune around fs! Edit: I would tune between 40-50 hrz

yeah i dont think youll have enough room to come close to 6 15s! i would do 4 15s ported or 2 15s in a bandpass

That's what I would set the f3 of the sealed section! Then tune the ported around 45 =D should get the lows hard! It's personal preference though! I know the skar products are low end monsters!

No problem! In a band pass u tune the lows with the sealed box! Adjusting the size will give a your desired f3 I like my f3 around the fs of the sub! The ported section is what u tune high... Between 40-50hrz in normally good for the ported section!

http://www.stevemeadedesigns.com/board/topic/126478-basics-of-a-4th-order-bandpass-enclosure/

$250 obo

Ok so he loves how low it's getting so he doesn't want to mess with anything right now... I'm going to do a little more tuning n the amp I think I may have tuned it backwards lol it was a quick job in the mall parking lot becuz I was getting paperwork for school en he was being inpatient lol! The cc-1 would be real nice to do this system!!! Lol! He's going to do the sides and back in Capet that matches the stuff in the truck and vinyl on the face and top with grill cloth over the port! More pics coming soon!

power acoustik p2-12 lows are getting it hard highs not so much so going to try to run the port exturnal if that doesnt get the highs better were prolly going to a 6x10 aero port

port is 24 cu in can easily make it bigger if needed!

This is what its lookin like i played with the airspace a little got it at 1.9 ported and 1.1 sealed! hooked it up and so far sounds great but i had it in my brothers car and couldnt tune his amp since its mounted in a impossible place and only got lows! tomorrow gotta hit the edges with the router and put it in! he hasnt decided what he wants to wrap it in! I got money on 1 week till im ripping it apart to get someones cell phone out lol!

sold sorry! a member on here bought it a little while ago!

building this one for a friend of mine! (Some how always gets free work) its going in the rear of his 04 f150! I had to fill the whole space with out getting to complicated so the ratio inst exactly 2:1 so this is what i came up with Chamber 1 - lower-freq. Vb = 1.251 cu.ft Fb = 45.86 Hz F3 = 34.43 Hz Fill = none Chamber 2 - upper-freq. Vb = 1.817 cu.ft Fb = 51.13 Hz F3 = 72.81 Hz I have most of it together so far just need to assemble the port cut the sides and then put the front on! SN: 1st band pass will hit all edges with the router once its done gotta make sure nothing pokes his leather!!!

TTT

no offers?

Size 12" Nominal Impedance Dual 4-Ohm Power Handling 800 Watts RMS 1600 Watts MAX Voice Coil Diameter 3" (75.4mm) Magnet Weight 123 oz. (3.48 kg) Speaker Connector Compression Terminal Fs (Hz) 29.2 Re (Ohms)6.50 Le (mH) 2.4 Qms 4.50 Qes 0.71 Qts 0.61 Vas (Liters) 55.8 Sd (cm2) 548 SPL (dB @ 1w/1m)85 Xmax (mm) 16 Woofer Displacement 0.099 cu. ft. (2.8 Liters) Cutout Diameter 11.25 in. (28.57 cm) Mounting Depth 6.75 in. (17.1 cm) Shipping Weight 33.3 Lbs. (15.10 Kg.)

T1 for sale couple months old 2011 model asking 300obo plus shipping but dont be afraid to make me a offer!!! Size 12" Nominal Impedance Dual 4-Ohm Power Handling 800 Watts RMS 1600 Watts MAX Voice Coil Diameter 3" (75.4mm) Magnet Weight 123 oz. (3.48 kg) Speaker Connector Compression Terminal Fs (Hz) 29.2 Re (Ohms)6.50 Le (mH) 2.4 Qms 4.50 Qes 0.71 Qts 0.61 Vas (Liters) 55.8 Sd (cm2) 548 SPL (dB @ 1w/1m)85 Xmax (mm) 16 Woofer Displacement 0.099 cu. ft. (2.8 Liters) Cutout Diameter 11.25 in. (28.57 cm) Mounting Depth 6.75 in. (17.1 cm) Shipping Weight 33.3 Lbs. (15.10 Kg.)

Anyone ??

bumping it up Need it gone asap will ship today $220!!! Can make a video of it playing as of now it sits in a box in my closet! TEXT ME ANYTIME 321-525-2833

no one? great little amp just need something bigger for my subs! Never seen below 12v!!!

Looks good we did a golfcart to! There so much fun =D

Just got this amp a couple days ago looking to get $200 +shippin! I do not have the bass knob for it! looks 9/10 has 2 small scratches on it! performance 10/10 everything works great!

2, American Bass XFL 15 We have used these woofers for about a month only on 400rms each (no clipping) still in new condition we decided to sell so we can fund the 4th order wall build coming up... we plan on buying more xfls once the box is in and we have the charging system is up to par! SIZE(IN) 15 IMP 2X4 RDC 1.7 LEVC(MH) 2.239 FO(Hz) 31.5 SD(msqM) 81.43 BLTM 13.299 QMS 3.285 QES 0.562 QTS 0.48 n(%) 0.638 SPL(Db) 91.3 VAS(L) 72.6 CMS(Um/n) 77 MMS(g) 311.2 VC 3 MAGNET(OZ) 220 XMAX(+/-mm) 19 POWER(RMS) 1000 POWER(MAX) 2000 F RANGE(Hz) <300 MAGNET DEPTH(MM) 215 MAGNET DEPTH(INCH) 8.46 Asking $450 obo +shipping

Thanks.... wish i could use it but when she does drive this car she needs the trunk room!

thanks everyone! When we get into a new shop later this month ill be painting this thing bright pink lol!

lol make it look pretty The back panel is made of cork board so its not really that sealed off and these boxes have ports on the side... this things old already so it rattles no matter what and the bottom and sides are lined with dynomat the lids coming soon!