Loudcivic

^^^ that man above me owns some funky pups and wow window shattering bass with just 2 twelves lol

i filled my whole rear quarter panel and all the way to my door and its solid and i noticed a difference in sound. i dont see why it wouldnt work it will make it better than it is now and its cheaper than any sound deadener. just dont get the big gap filler get the one the step down its like the middle one. i went through the big gap filler can in about 15 seconds and didnt get much done with it. then i used the one down i think its like small gap and cracks filler and i did my rear quarter panel and part of my tail gate with one can. yes my honda has a tail gate its a hatchback. but it should work just do it as thick as u can

this setup would get you loud for the amp you have. there d2 so you would run a 2 ohm load and a decent box and you would be suprised in how loud it will be off the amp you have. http://cgi.ebay.com/2-RE-AUDIO-SEx12-12-SE...=item53de9203d8

ya i would say its safer to go the relay way than just a toggle switch. but the toggle switch is cheaper since you usually have one layin around. not sure if the toggle switch way can hurt the hu or not. how and what wires do you hook up for the toggle switch way

this is how my brother did his and works fine.

well theres your problem your only using a power acoustic 400w amp. at least hook up the profile amp they do a lot closer to rated then the power acoustic does

yust drain the system and flush it with dot 3 and you should have no issues with it at all. when you put the clutch in did you put a new slave cylinder in?

my brother did his with a relay and has had no problems with his. i dont know about the toggle switch way so i cant tell ya how that works. http://cgi.ebay.com/PIONEER-VIDEO-BRAKE-BY...=item3a5556fea8

well since i have a 93 civic hatch i will help ya out. i have a carbon fiber one on mine and i think if i didnt have it on there i wouldnt like the way the car would look. i think it makes the car. theres a few on there check it out http://shop.ebay.com/?_from=R40&_trksi...-All-Categories

this is a lot better memory for cheaper http://www.newegg.com/Product/Product.aspx...N82E16820161183 you will notice a difference i did even tho im running 32 bit windows right now. and you will only see 3gbs but it does help out a lot and maybe later you could upgrade to say windows 7 64 bit and gave the full 4gbs of ram

ddr2 and ddr3 on a videocard are different things than your memory in your motherboard. you can have ddr1 memory in the motherboard but have a ddr5 videocard edit: if you have pci express this videocard will work great http://www.newegg.com/Product/Product.aspx...N82E16814161287 if you have pci theres really not that many good options and this one is a decent one http://www.newegg.com/Product/Product.aspx...N82E16814187083

first you need to find out if you have a pci express slot cuz the first one is a pci slot card and the second one is a pci express slot card. look at this picture and look inside your computer only a screw or 2 to take the side cover off and look at the slots. then we can find out what card would be best

you do know that some old plates sell for 200-800 on ebay right?

all i have to say is wow can i have one lol

did you buy this from spy?