Cozmoo

I checked my original download and it was 160k. Time to re-download Thanks!

this mixtape is hottt. I'm listening to it on my sonys and they this whole mixtape just sounds amazing.

the fuse is not busted, like I said, we plugged it into my car and it fired right up. The deck works great, we think it might be something with his car, even though it was working the last time we tried to use it in his car.

Yeah everything works..well it did. We didn't get it tuned yet but wanted to make sure it works, and I think it was dimming his dash lights. Now his head unit won't turn on, it works fine when we plugged it into my car, but there is no power to the headunit in his car now. We are thinking something happened to the little chord you plug in that powers the headunit. Any ideas?

Somehow the ground found its way into the Power port of the Amp. and the Power wire found its way into the Ground port in the amp Even though I know I put them in the right places and my friend was watching me do it. lol

This is the first I have done by myself, and we figured out the problem. It was stupid but we got it fixed Thanks for all the help.

Right-o, thanks.

so its safe to just unhook the battery ground, put the fuse in, and then hook up the ground again?

Well his battery is in his trunk, but yeah, the ground is hooked up in the battery. So unhook the ground, put the fuse into the block. then screw the battery ground back in? ok. the only pain with that is his ground on his battery is hard to tighten, but we can make it work. haha. Thanks.

So I hooked up my buddies system today and it came with a fuse block, so we cut the power wire and installed the fuse block and we setup his whole system with the fuse out. We hooked it up to the battery and to his amp, but when we try to stick the fuse in, it sparks. We cannot figure out why because his car is completely off, and we cant put the fuse in, because it is obviously sparking. Any ideas?

Yea we are going to this store by here called Horizon and they tune amps really well for a relatively low price so that we don't clip or anything.

Thanks for the wicked fast replies guys. The best thing would probably be just to wire it at 4Ohms I guess then, because he just bought that amp and it should be shipped here tomorrow and I doubt he wants to return it. So should we just wire it like this?

Oh, well here is a link to all of the amps specs. http://www.sonicelectronix.com/item_7302_K...r+ZX1500.1.html

Hi, I'm hooking up my friends woofer tomorrow and need a little help with the wiring. He has a Kicker 15in L7 2000RMS DVC 2ohm in a giant ported box He bought a Kicker ZX1500.1 Amp Mono D which has a RMS output at 2 ohms: 1500 watts x 1 chan How do I wire this? I was looking on the12volt and I checked rockford but there is nothing on how to wire 2 ohm to 2 ohm. Help haha.

lol I figured as much. oh wells. Ok well even if it is 500 watts. that is still perfect for my current sub. and I am selling some stuff at the moment so it isn't that big of a deal. It will do me good.