hzsogood

sub is amazing, I cant help but to add another.... amp seems to be holding voltage around 14, which puts be at a descent power setup... 2 sa-8s @ 1000 rms off a aq1200d .. This sub is noting less than amazing , and even tho I'm behind the times seeing as the v3 is on its way out.. I just want to thank Sundown for all the amazing mini subs over the years!

Thanks Bryan

Got all the pieces cut for the box above this post. Only thing of concern is the depth of the sub... the depth of the box is only 7 inches. The mounting depth of the sub is 6 5/8... which only leaves about 1/2 between the back of the box and the magnet.. is that OK, or should I add a second baffle to raise it up another 3/4"?

here is the one I came up with. How does this one look? and would there be any issue with sub up port back?

Well. After trying different enclosure sizes sub up port up isn't gonna work. But sub up port back should be good. 14" of port area, 15" per foot, tuned to 36.6 .. port ratio is 1:3.5

What should my port area, and port area per foot be at ? 12-14?

Gotcha! Thanks man. I'm excited to get this little guy. Should be here on Thursday, so I still have time to kick things around a bit with the enclosure.

OK.. Im trying to get the size down a bit without making the ratio worse or the port area much larger. What did you mean "what am I going to do"? As far as music selection? Here s the current design.. should be .76 cubic feet after sub displacement

Yea I have no room to do aeros, from what I can see, so slot port it is.. The problem is, when I plot out the box with the Torres tuning calculator, my port ratio is 1:7.67, which seems high? port area is 17.25, port area per foot is 17.08. and thats exactly .95 cubic feet net after sub displacement.. Is that to big of an enclosure?

Thanks man. Should be a fun lil project. Makes it tough wanting everything hidden tho , really limits my space. I don't want anything crazy. But once I get the first one in there. I'm sure I'll want another. Can't wait to see his this little guy sounds in there. For now I'll be pushing it with my aq1200d at 2 ohm.. so should be around 700 RMS or so after voltage drop and rise

I am building the box. But I want the cubby area open so I can mount the amp down there. Then I'm just going to put the box on top of the 2 side humps. And I want it lower than the top of the gas tank... I'm sure I could make a 4 cube enclosure but I want it all hidden. Behind the carpeted flap... Hope that all made sense lol

Thanks. Actually its just going to be one sa-8 for now. So .75 net tuned to 35. What numbers should I have for the 3 areas I listed above? I remember 16-18 cubic inches of port per cubic foot of box?

If someone has a minute could you work with these dimentions.. 9" H - 36" L - 13" D Thats the max area I have in the back to work with. Im using the torres calculator, but cant remember where my numbers need to be for these 3 specs Port area Port area per foot Port ratio

bump