Vinnyhimself

Jenkees! Throwing fire is my shit

Some dl links Skream- in for he kill http://www.mediafire.com/?mhmuk5kjnk2d72y#1 Knights of cydonia remix http://www.mediafire.com/?ejonog2nvqr

Some sick songs i have come that are great for demos and w.e. both have really long noted deep bass also great songs to blaze to **DISCLAIMER** may shred your car your pieces http://www.youtube.com/watch?v=WJ2QuFJvQmY

ok sounds good thanks for all the feed back

thanks homie

from what i have read on this forum its a general rule to use ~16sqin of port per cubic foot. does that also apply for aero ports?

ok thankyou for the feed back

in a 12 volt system do you need the VCM in order to use the 14 volt battery? i know that the vcm allows you to set a cap on voltage so i wasn't sure if its required when using the 14 volt battery

this well he connected it to my battery so i am assuming is both the battery and alt?

running to the frame is the same as running from neg port to back battery neg port becasue the fron battery is grounded to frame.. but by using the frame there is less resistance so in short back battery short run to frame = better.

bump

i want to know how to choose what frequency to tune your sub woofer enclosure to? Say my sub-woofer's fs =31 hz do i tune the box th 31 hz?

was gonna run 1/0 to a second smaller bat. in the back

ok so i plan on having one aq 2200d so i wanted to see what my current electrical system sat. i went to auto zone and he hooked up the machine to my battery. the volts were sitting ~13.5v idle and total amps was 250 and change. this is all before a big 3 upgrade. should this be good ?

bump