kingleo

45's are in mostly. Port openings will be rounded. The interior of the box will get resin to seal it up.

37w x 15h x 22 1/4d. 2.5" wide for each sub the a 5" main port

3/4

Ranger is right. The + and - leads are connected in the amp as one terminal. If you are still confused just use one set of terminals and wire the subs up as normal.

You guys get the idea. Pic time! Port

Got the 45's done at work. I'll start assembling the box today.

I agree normally I'll give 10's 1.5 cubes and 12's 2-2.5. To account for box rise. Bigger the box louder the bass.

Running a MB Quart 1500.1 @ 1ohm. They should be happy until I do a Fi recone and bump the power to 800 rms, then might run a second 1500.1 for giggles.

Pics so far... Mock up

Some may have seen that a couple weeks ago I scored 2 12" RE SE's at a pawn shop for a c-note. Been playing them in the sealed box they came in. THEY GET DOWN! So now it's time for them to move in to a new 4 cu.ft 32hz home. Thanks to Joe X for the design.

It's used for rounding the edges of ports and it looks good.

I know the crescendo 1000.4 can do it. Run stereo to 4 channels and mono bridged for 2 subs.

Hey Joe, i know it's bad but i have never put 45's in a box before. How wide or what is a good size for a 45? Will 2-3" be good? I think 45 degrees is a good angle for 45 degree angles. Thanks capt obvious. But the 45's can 2" or 5".

Hey Joe, i know it's bad but i have never put 45's in a box before. How wide or what is a good size for a 45? Will 2-3" be good?

Going to start on the box this weekend. I checked and the price of MDF is down which is a good thing. I'll b taking a lot of pics. If I'm lucky I can finish my big 3. Getting to my alt is gonna be a mission.

You could sell the alpine and save up a little and get a 1500watt amp to really drive te lvl 2's.

Thanks bro looks real good.

Does anyone know a good box builder in the Orlando area?

Good info in those vids, but I may still want a pro box builder to do it.

I'll tell you what, give me a little bit and I'll draw up a sketchup of it and pm it to you with all dimensions. But definitly practice kerfing before you kerf the large pieces, cause I messed up a couple pieces it's all trial and error till you get the hang of it. Lol Sweet thx bro.

Just want to get all dimensions. Want to build a rock solid box once.

Nice design. Few questions though. I'm used to slot ports so I need more info on the kerfs. How long are the port walls? Width of the port.

No can do bro. But I can give you a funny story rewired subs to 1 ohm. The box gave way after 2 min. One sub jumped out the box with all 8 screws in the subs screw holes. Hate particle board boxes. Lol.

I have 2 12" RE SE's. Want to go ported. Hoping to get designs for both slot and kerfed ports. I mainly listen to hip hop, r&b,and dubstep. Gonna be powered by a mb quart 1500.1 subs are dual 4's here is some info As far as trunk space. I have 37w x 15h depth is optional to make up airspace.