Relyks

ok this will be a build log but starting in july geo prizm a wall? yes a wall! what subs audioque hdc3 18"s? or DC level 4 ,5 , or xl's ? ( if you are dc dealer pm me with the price of all of em. shipped to florida ) and send me the prices for all of them in 15's to 15"s or 18"s? amp im thinking will be a audioque 2200.1 d 1/0ga knukonceptz power and ground and big 3. a wall should have about how many cu.ft for these subs? (on average) pioneer gs series 6 1/2" door speakers 6 of em jvc headunit what type of RCA's? what type of batterys? port in middle of subs? above them? or to a side? sealings it up! RESIN? cocking? fillers? etc etc a alternator strong enough to power it all would be how many amps? would a mechamn 270 amp alt put enough power for a aq 2200d? remote wire size? speaker wire size? wire brand? any recommendation on spl door speakers? mids? highs? i want your opinion before i buy it any of it. so you tell me what you would do? and some tips and tricks? all input is appreciated and you get to watch it all get built

thank ya THANKS VERY MUCH I ENJOY IT ! Pipes .. havent tried that yet i dont smoke but worth a shot ehh? and thank you like what lol!?

and it is a small computer it is a microsoft board following a old asus microsoft design board and intel processor and GPU's . copper clad aluminum heat sinks on the GPU and CPU in a aluminum mix case cheap ball bearing fans with not enough air flow dust gets trapped in the so easily if any of you were to take advice and make your xbox last longer pull the case off clean the fans and dust out everywhere on the board get a fan/power adapter that they sold when they first came out and leave it open for all that air to cool it off dont keep the heat in.

fail not even that complicated no soldering or ordering other then a new drive was needed or needed to fix it only time you will need to solder fixing a xbox is E74 error which is GPU failure. everything you will ever need to know about xbox's is on the website enjoy http://www.llamma.com/xbox/Repairs/repairs.htm btw sata cable is the cable that connects your CD ROM/DVD Drive to the board they are small computers with intel processors. they over heat cause of lack of air flow and not enough and cheap heat sink paste. you can use a USB flash drive to use the software and flash it that way.

from what i have seen the dance games look like so much fun

sorry for the price post. didnt know sorry jeff need pay more attention to the rules once again sorry guys. still looking for more info on the subs ( not really pricing and not by the pair single 10 or 12 shipped to tampa area of florida )

sorry.

about how much are they anyone own a pair that they can show me pics and videos of and what are amount of air space those subs need. just want a little info on them.

the pens i can explain from beginning to the end wood blanks start off as 1 1/2" x 1 1/2" blanks that we cut to size of the tubes for inside of the pen once cut to size we get a 7mm drill bit line it up and drill a hole directly in the middle then we rough up the tubes a little bit with 80 grit sand paper (i believe the tubes are made of brass or many metal melted together i am not sure) then we glue the tubes in with gorilla instant glue and wait once that is done we put them on the lathe and have the lathe set at 2750 rpm get out our chisel set and start cutting away till they are to the style or size we want (we can do many things to them make lines in them engravings dips and grips) once we have it set to how we want it we start of with 80 grit and go all the way to 850 grit sand paper and sand them while they spin on the lathe till there super smooth then we make the pen a little damp let it dry a little (so pours open up and take the polish and wax well) then we get out some shella polish and spin that around on it while its on the lathe till we like the color and or shine ( both friction polish and wax ) then shella wax on the pen until we like the shines and then it is good to go . we then pull it off there are few parts to assembly ( the clip , back, tip, piston, middle ring , and ink cartridge ) we then pen press everything on till it fits in , the piston has to be in just right or the point of the ink cartridge will stick out to far or not far enough making it look sloppy and cheap. slide the two blanks together and bam you got a 100-300 pen ( mainly lawyers and so buy them i have never sold them this way i sell them cheap for 15- 30 ) when i am done i buff them a little bit with clothe so they feel really sleek and smooth. i have done name engravings on them by hand and laser. same thing for the acrylic blanks ( acrylic is like a plastic ) sept we sand it starting at 500grit to 1000grit and use a special wax for the plastic to hold a shine. also we use buffing pads and dip them in water cause the plastic gets hot and tends to crack. its a fun hobby that keeps me calm and relaxes me i like it. i can probably make any pen in 15 minutes or less. over last three years i have made 300+ for my school to sell at fairs arts and craft shows and more the school sells them for $75 normal guy doing it as a job $150+ ( depending on the wood ) i do it for $30 or so 15 for the kit and 15 for my labor. i go to a career school so of course i get no type of income on the pens they sell. but i still like to do it. The Heart also the heart it is pine wood i cut it out on a band saw sanded it drilled a hole then cut the arrow out on a band saw sanded it put the tip of the arrow in boiling water pulled it out after a minutes clamped the tip so it shrunk pushed it through the whole put tip back in water and wood expanded again. magic then i burned it with a torch as wood burn finish lol The Signs i cut it wood then mount them to a bottom piece i do all the word engravings with a solder gun with wood burning tips after sanding all the wood and cutting them out to size then wood burn them to give it character. The Bowl is a circle piece of wood that you cut a lip on for chuck to hold on one side and then use a dove head chisel to start cutting in wards till its to your depth and size then sand and polish like a pen. ( wood sizes vary on chucks and chisels ) The cards i use small box hinges cut out wood then hand engrave the words and laser engrave the pictures sand it and depends on the style of the card for the finish .

i like woodwork im not all that talented but im young and would like to see what other people do and are capable of and i would like to catch some tips here and there i mainly wood engrave and cut stuff on the lathe. here some pictures of what i have built and or made I have cut sanded and polished like 95 pens ( wood and acrylic ) 10 bowls 5 cups 2 plates like 50 cards 10 hearts 20 name plates 15 key chains a few plaques and 10 bats all different styles. im 17 and this is a small little hobby i do to cool off sometimes i got pictures of houses , sheds , dog house's , onion racks , picnic tables , Adirondack chairs , key chains , shelfs/dressers , and more i could post . and honestly i have seen pens like these cut engraved and shipped out for like $100 or more its crazy but if anyone is interested ill cut and sell them with engravings for the next 2 weeks for like 15-30 bucks depending on wood style and so on. a name plate for teacher at my school beotble and coco bolo wood for some teachers at my school. some stuff i made for my girlfriend

anyone else opinion on this?

ok my uncle listens to slipknot and metallica sevenfold etc etc he wants me to build him a box for 1 12 ported what should i tune it at???? and how many cubes do you guys think. box is a single voice coil 12 takes like 800watts peak 400 rms

check out my build log you can see a better picture of him on it lol you know he had to show us how stiff aq are at first and test the cones

Yeah man go for it when your ready . . i also have problems with money right now so i feel ya bro hopefully ill see a big improvement maybe i can give my amp some more power lol cause it sure isnt enought to fully power it at 13.1 volts and 3k rpm.

What Ed Lester told me was the an amp CAN indeed clip as a result of voltage drop, but it has to be extremeLike 7v, dropping to 12 or even 11 will not cause an amp to clip. thanks once again dam dude your always on my post answering my questions you to hdorres so thanks you guys for the help and knowledge

does amp clipping come from lack in electrical sometimes? i have read a lot about clipping and mainly just hear about songs clipping and stuff.

mechman 220 amp and XSD3100 battery already in mind. $839 hoping that would be a great fix

im not saying im looking for a big gain just instead of dropping 1-2 volts maybe dropping 1.5 volts or 1 volt instead like a little increase so that .4 volts would mean a lot since i almost drop under 12 volts at times.. and if you all check out my build log a 220 amp alternator is already in mind from mechman full adjustable and cased with everything for $500 just not money i have right now if you read my build you will understand why. Edit: but thanks everyone for your opinions.and i will definitely be doing the big 3 to my truck some time. but if you all could drop by my build log and put your input in to where i should upgrade. that would be nice.

lol small is a understatement to my 60 amp toyota stock alternator that is on its last leg so i doubt it even puts out 60 amps. also im running 1/0 ga knukonceptz wiring but still my voltage drops so much im not looking for a gain in voltage , just not as much voltage drop for ex. i run 13.3 volt when bass hits it call go under 12volts which isnt healthy on my amp so im wondering if big 3 will stop my voltage from dropping so muchhhhhhhhhhhhhhhhhhhhhhh.

ok my truck runs at 13.3 volts my alternator on its last leg i know... but will i notice a big difference in my voltage if i get this big 3 done with already? and hopefully it will be healthier on my amp also anyone have any clue how much power it takes to completely full power ur aq 1200d ?

beautiful my some jeezy hypnotize or wiz khalifa phone numbers, and show all the flex you can maybe lay a remote on the roof or something

where is my On My Level video boy

you answered it dont worry

ok thank you for clarifying that for me

huh? they wont be in the same area? my question is more like this not in how long the port is but can i have 2 different aero ports on 2 different sides of the box? like ported behind the driver seat and passenger.