sundownz

Depends on how you define soon I still have to get a prototype in and make sure the specs turn out the way I want before starting production - so it will be several months.

New site should be up soon w/ the SA-12 They are $175 each this month on sale, specs here : http://www.stevemeadedesigns.com/board/ind...st&p=677366

Did some more testing w/ my setup with just two SAZ-1500Ds :

I haven't been able to find a vendor for either locally -- I can get several color options in this finish type... my main concern on the prototype was to prevent rust for testing so I got the most convenient color for the coating vendor.

Bare = Rusty

Should have one playing for initial testing in 5-6 weeks.

Steel has been coated : Very high temp coating also done locally... about 10 miles from our shop.

Working on it.

We should start shipping on Friday in the order the pre-order was received. You will know yours has shipped when you get a tracking # @ your Paypal e-mail account or from the dealer you ordered from. Don't blow up my PMs and e-mails asking if your amp has shipped -- just wait to get tracking numbers.

It is more than rated power but I doubt you will break them.

600 RMS Some pics of them + my setup : http://www.stevemeadedesigns.com/board/ind...showtopic=48745

Indeed -- but only at 1.3 DCR "per side" -- which is about 2 ohm nominal. Subs barely move

VERY well

You mean a stereo can do under a 150?! http://www.stevemeadedesigns.com/board/public/style_emoticons/default/hairtrick.gif

Indeed - it is crazy low! It was more than loud enough for Paul - he went home happy

153.1 @ 35 Hz run We'll get more up as soon as we can of music and whatnot.

Paul Strouth's Jeep. Currently doing 153.1 dB @ 35 Hz sealed on the dash on the TL with an American Bass 1000.1 wired to 1.33 DCR per "side" (as it is two amps in one). Power not measured but the subs are moving maybe 1/2-3/4 inch P-P wired at that load. Derrick will be in shortly with more pictures and pictures of the TL screen Port is 288 in^2 tuned to around 44 Hz "on paper" but peaks at 35 hz in the vehicle. Roughly 20.4 cubes after port displacement for the box... so after sub displacement just a hair over 1.5 per sub. --- We tested it in an open warehouse section of the shop... and it did a number on my office :

It will be around 4.5" deep

Whenever the details are all ironed out, proto tested, and production started.

Looking at D4 and S4 coil options.

Beyond the 400 RMS rating / 2.5" coil size I haven't given out anything yet

I was expecting to have my prototype last month... so I won't venture to make a guess since it's already so late! Hopefully soon.

It's an 8" -- the X8