sundownz

PRE-SALE ORDERS ARE FINAL - THERE WILL BE NO REFUNDS -- If you are not 100% sure you will be financially stable then don't pre-order. No more exceptions. THESE WILL NOT BE IN UNTIL AROUND THE END OF OCTOBER!!! If you want something sooner the 3500s are expected in before the end of August so I suggest getting one of those. DO NOT pre-order if you are in a rush or on a dead-line -- as always there can be delays with pre-orders. Just want that to be clear In any event... we decided to open up ordering to offer an extra early-bird tiered price structure on the pre-sale. --- PRICING: 1) Before July - $1000 each 2) During July - $1100 each 3) August until October - $1200 each --- TO ORDER - Paypal me @ [email protected] --- Regular price will be $1549 MAP / $2149 MSRP once they are released and on the market... you can buy at a HUGE savings on the pre-sale. The picture is in a generic casing. We are ironing out the details of tooling a case that looks as close as possible to our SAZ casing before release - it will be a wider case but will look as similar as possible to the SAZ amps. Pictures are forth coming as the details are finalized. Rated Power : 4500 x 1 @ 1 ohm 2000 x 1 @ 2 ohms 900 x 1 @ 4 ohms ---- TEST RESULTS SO FAR : 3100 Watts @ 1 ohm nominal rising to 2.67 ohms on 14.4v dropping to 13.6 volts 4650 Wats @ 0.25 ohm nominal rising to 0.71 ohms on 14.4v dropping to 11.6 volts You will get more with a beefier electrical setup 5290 Watts @ 1 ohm nominal rising to 2.12 ohms on 17.9 volts (did not measure drop) 6930 Watts @ 0.5 ohm nominal rising to 1.31 ohms on 17.9 volts (did not measure drop)

The site is growing nicely!

Thanks Just converted them over to 12v batteries last night - going to play on 12v for a bit.

Is it all good now ?

Yah, that looks fine to me as long as the wires are hooked to the sub right

Okay - then hook up the + to one + on the amp and the - to one - on the amp. Done.

How many wires are coming out of your box ? One + and one - ?

There would be no trades on the pre-sale.

We have been using a plastic domed pole plug for our cooling option for some time now. I decided to take a new route and these will be shipping as of orders placed today and beyond. They were made down the street here in Troutman, NC Solid aluminum plugs! The shape is a bit more aerodynamic than the old plug as well: Also, being aluminum, the plug itself will soak up some heat.

Regular price will be about $1549 MAP / $2149 MSRP.

Proposed pricing schedule... Before July - $1000 During July - $1100 August until October - $1200 Who would be in now ? Especially with the early bird price breaks

I decided to keep running this through June!

Congrats!

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...em=330335287405 Check it out.