Jump to content

sundownz

SMD PARTNER
 View Profile  See their activity

  • Posts

    6002

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by sundownz

  1. sundownz
    They are built like all of our other amps... a large portion of our customers run their amps at 1/2 ohm.
  2. sundownz
    Indeed With my full amp setup (was four 3000s... will be four 3500s) I can pull around 2000 amps on a burp, so I need all I can get!
  3. sundownz
    I should be ready for the show You can just bring your truck out!
  4. sundownz
    This is what I did to the floor in the back : This is what I found when I pulled up the rear carpet (WOW): --- My Jeep came right off of a farm when I got it... when I burp it a bunch of "dirt" always falls off. Well, I inspected some of this dirt in my shop and it is actually rusted metal flakes mixed with old mud *laughs* So... lets hope the Jeep lasts long enough to reach my SPL goals :) I was not able to meter the gain here as I had the entire system out re-working the amplifier rack for my new enclosure and new buss bars - you can see the new buss bars here : http://www.caraudio.com/forum/showthread.php?t=401848
  5. sundownz
    Thanks Hopefully it is loud once I get it all back together, haha!
  6. sundownz

    Sundown Amps

    sundownz replied to Moore941's topic in Amplifiers

    Indeed - quite a few of our customers do so.
  7. sundownz
    * Wires installed onto bars * Taped over the ends of the + bar near the chassis * Flux Caps and SAX-50.4 on bottom amp rack * Only the "-" bar is exposed
  8. sundownz
    We'll see how it does
  9. sundownz
    Trade-in program is becoming a hassle again so I am shutting it down. Thanks all
  10. sundownz
    Yep!
  11. sundownz
    3" x 2" angle @ 1/4" thick
  12. sundownz
    * I have just a little bit of aluminum here. * Front brackets to hold them in place will be aluminum angle just like the bars. * Allen bolts + lock washer + brass washer (have one on both sides) * This is where the wires will connect for the amps, grounds, flux caps, etc
  13. This post cannot be displayed because it is in a password protected forum. Enter Password
  14. This post cannot be displayed because it is in a password protected forum. Enter Password
  15. This post cannot be displayed because it is in a password protected forum. Enter Password
  16. This post cannot be displayed because it is in a password protected forum. Enter Password
  17. This post cannot be displayed because it is in a password protected forum. Enter Password
  18. This post cannot be displayed because it is in a password protected forum. Enter Password
  19. This post cannot be displayed because it is in a password protected forum. Enter Password
  20. This post cannot be displayed because it is in a password protected forum. Enter Password
  21. This post cannot be displayed because it is in a password protected forum. Enter Password
  22. This post cannot be displayed because it is in a password protected forum. Enter Password
  23. This post cannot be displayed because it is in a password protected forum. Enter Password
  24. sundownz
    I am thinking until May 15th or so If it is really successful I may keep it around until the end of May.
  25. sundownz
    Nice
×
×
  • Create New...