meade916

wiring the rack. Sneak peak. there are 2 4 channels. First four channel amp is left/right tweeters on channels 1 and 2 and 3" mids (left/right) on channels 3 and 4. Second four channel amp is Right and left 6.5's on channel 1, 2, 3 and 4. In other words, each 6.5 has it's own dedicated channel. Of course the 7.5k is on the @official_sundown_audio 24's... skyhigh 2/0, 4ga, 10ga and 16ga OFC wire used. SHCA Rca's too. @4xspower Titan 8 Lithium delivering the juice. New video coming soon!

Time to run some Skyhigh Audio 2/0 positive/negative from the battery's to the blocks. The second wall in the rack is to run the wires nice and clean. They will still be seen but it will be a lot cleaner disappearing into the back and popping out where they go,

3/16" Steel plate with #8x32 allenhead stainless bolts. Everything drilled and tapped to accommodate.

I decided to shoot it to match the box. I didn't want to spend $300 on a full set (4 quarts) of the "Raptor" liner (in white). I just needed enough to do this rack. So i found some in a can at Autozone. It's still Raptor liner, but in a can. This took 2 cans to complete and i also shot the back and bottom of the rack in Black liner. I don't have any shots of me shooting it because i forgot. I was busy trying to get this done. Holes were drilled and tapped for #8 x 32 stainless allenhead bolts.

i decided to make the rack out of 3/16 steel and weld it together.

This has been a long time coming but i had good reason for the delay. Time to get started.

Before i take these 2 strapped B2 audio Rage 2500.1 amps off the bench, I wanted to drop the impedance down and run them again. 1.33 ohms = .665 (or .67) each when strapped. Will they smoke? how much power will they put out? well watch the video and see for yourself! WOW!

damn these amps look good! They sound great too! This clear lid i made today sets it off nice 👌🏼

I always wanted to strap 2 amps together and test them. Since i am dropping these two into my Ford F250 soon, i figured today was a good day to do that! For info on this amp visit http://www.b2audio.com More specs on this amp (pdf file) here https://www.b2audio.com/wp-content/uploads/2019/03/rage_amps_man_090119.pdf Thanks for watching if you did!

Now THAT'S a charger, 90 Amps! XS Power Intelli-Supply PSC-90 is a BEAST! Someone returned it for no real reason, didn't even use it...so i kept it and I will be glad to. Check out this monster as i unbox, setup, and hook it up to 10 14v batteries in the Tahoe. Thanks for watching if you did!

I have never in my adult life lived in a place i could park my car with ANY sort of modification to it outside the house. Sure, when they are stock who cares, but mine are never stock. Feels good to slam the door and walk inside and not lose a wink of sleep. I love the "new" pad! (been 8 months almost i guess it's not so new anymore)

did a little more tuning and then decided to take the Caddy home finally. The Audiocontrol DM-RTA and DM-810 is a lovely combo. 40 miles later, and a bunch of songs listened to, it sounds really nice! Ill probably tune it even more after evaluating it a little more. That is what it's about though. She looks good parked at the house

thank you bro.

It almost looks like a grey scaled filter or something...but it isn't. This photo is real life. green ain't exactly my favorite color but it does look good here! that's all for today! new video coming tomorrow!