JaydubYa69

wow thats clean looks right out the factory! kudos!

LOL @1:22 I dont have that problem in my honda LMAO

LOL I think if he puts 2 SMD 18"s in there, they will move enough air in the car to keep the driver cool in the summer... until he comes to a stop light and has to turn it down LMAO jk

Weather issues But here are Moar Pixs The Port ready to be installed Measured 22 times centered Just right LOLz Gorilla glued and screwed into place Okay now that the port is in place time for resin! Now the saving the best for last! I kinda wish i could have pushed the subs out to the egdes a lil bit more I think this will be fine...

MOAR Pixs time! The bottom Screwed and glued! damn alot of screws but I wanted to make sure my first box was sturdy Oh this Is a lil trick i round on the fourm Glue in the hole makes the screw slide in like butta lol Now it is time to build the port! damn i was picky about my cuts... but it came out niceeeeee!

Okay just some teaser pixs cuz i gotta get on the road Bought the right wood this time Test fitting all the mdf to Make sure the kid did a good job He did a pretty good job... I only had to cut the side walls everything looks good time to get this party crackin Koo ta ta for now

do you know what osb is because that is not it Well it shooo' wasnt MDF LOL jk I actucally went back to the Homedepot I bought it from the tag Read OSB... But its all good i have a few projects in mind for the osb LOL

thanks when i go to home depot I was like Ill be damned they were right... well it cost me an extra $30 but to not have it sound like shit (my prefab gets loud but not deep) is priceless! and i got lucky and didnt have to pay for any of the cuts I was like WTH when the first guy got done and was like your going to need another sheet... im like look at these cuts they are all slanty and warpped uhhh get someone who knows what they are doing... I will Post the progress pixs in a lil while dont wanna get lulz

THANKS everyone the Mistake has been corrected LOL i actually was going to get mad but Ive read alot on this fourm and I did grab the wrong one... So I went back this morn... it was funny cuz Ol guy cuttin the wood ended up destroying a 30 dollar sheet of 3/4" MDF cuz all his cuts were off by ALOT! and i was like fudge that im paying for it so cut it right LOL so they called in the young guy who worked in the department he cut every thing correct and let me keep the smaller Pieces of scrap from the other first sheet! Im learning! thank you splzx3 and anubis

Yea its mdf I plan on resin'ing and glassing the inside of the box as soon as get the bottom and the port built. and if i have any resin left hitting the outside of the box as well!

Time for some screwing and gluing Now i just need to pull out the table saw so that i can trim the bottom board and then it gets glued and screwed! time for bed moar pix later

Big shout out to Sanitarium for coming up with this for me! I cant thank you enough bro! with this in hand it was time to hit my old job of home depot (i used to do loss prevention for them lolz) Needed 2 of these but really only needed one lol getting those sheets cut in the store... it took forever to find someone in the store to cut them... but they didnt charge me for the cuts hehehe mocking everything up that night but it was to late to get it started and every thing on the right side will be (was removed) I thought i had 50" of width in trunk space but dang shock towers i had to take the box down to 36" in width

well first my names Justin And Ive been Installing systems in cars since I had my first car (Ironically it was an 86 CRX LOL) well you know how you can do something for so long and truly know nothing about it? That was me until My local DJ buddy (DJsn1 from Sacramentos KBMB 103.5 the bomb) Introduced me to Steve Meades You tube channel. After Watching all the build videos for the "HOE" i was inspired Ive never seen sound done like this before... Was so used to "ghetto blaster" ie where you hear more trunk metal rattling than actual bass. (the shop that built my box for my 4 door Civic said that was an option i was like wtf) So a Little while later My DJ Buddy arranged for me to get a demo From Meade in chicken's "Hooptie" then I had the honor to demo my civic's system for for meade I felt like such a but he said it sounded good but the box and i agreed NO more prefab boxes for me LOLz so since that day I spent a month reading all the builds on this site researching learning and planing so i finally got the cash to start my build so let me get on with it: Heres the ride: my 89 Honda Civic hatch back I call her Blu Ninja (the final paint job is going to be a low gloss black) blu ninja and my friends New Camaro Now the current system... LOL all those wires have been redone like a million times... I have to re do them yet again cuz im going to 0/1 gauge from the front to the back and the amps have been moved to the back of the seats... but they are going to move yet again when my 3 new amps get here

wow that is simply amazing LOL the comment in the video "is it for a basket ball player or something" LOL

wow the ar15 and MP S&W I mean what the heck is he hunting with those? this makes me wanna move to the woods so i can have a Arsenal like that! well just the Ar15 and the MP and maybe the hand guns