pioneer9412

I watched those earlier

The box was suppose to go in the trunk,but it was too damn big lol. I need my backseats so i'm selling it and getting a blazer.

http://www.youtube.com/user/pioneer9412?feature=mhum

Do you offer in higher output alternators than the one stated above?

That is one long ass drive.

10000000 Kelvin K = 17999540.6 ºF

Alright guys the box wouldn't fit in sideways either so now its where the backseats were. Its a 2002 Honda Accord Coupe.

I have to remove the carpet and spare tire to fit in long ways. I'm just going to keep it like that because I need my backseat lol

Ok, I screwed up on my box and it won't fit in my trunk. Its only a couple of inches stopping it from going in. The original plan was to have subs facing the back of the car along with the port, but the only way i've found to put it is long ways with the subs facing the side of the car. My only other option is setting it in the back seat. Would it sound shitty firing to the side of the car?

Alright thanks, this will be next purchase

Do you make a high output alternator for it?

Can someone please help me with finishing my box. Today I went and picked up some MDF and cut all the pieces for the box. Do you glue the box first and then screw it together because my dad is trying to tell me to glue and screw at the same time? Also what should I coat the outside of the box with?

You could try local news stations. I know some of them have classifieds on them.

Nope not yet i'm still waiting to get my new HU in and all of the fuse blocks so I can have everything running

It has the same exact settings on both sides, 2 gains, 2 hpf filters etc.

Can I just use a y splitter instead of another set of rcas

Yes I have 3 4v outputs, 1 front, 1 rear, and 1 sub. I just don't want to have to run a 3rd set of rca's lol

I just wanted to say thanks to everyone on here who has helped me out, but I need some more please. Ok so today I went and picked up my 4 SoundStream t-4 15's, SoundStream Pca 2000d, Clarion Apx4240, battery cap, and capacitor(the only reason there is a capacitor because it was free). I need you all to help make sure you don't see anything wrong with how this is all getting wired up. I drive a 02 Accord it has a stock 105 amp alternator and the big three has already been done. I have 0 gauge running from the Optima Red Top under the hood back to the battery cap in the trunk. It is going to be fused at the battery under the hood with a 250 amp fuse and then again after the battery cap with a fused 250 amp d-block. The d-block will have 2 four gauge wires with one going to each amp. The 2 amps will be grounded with another d-block going back to 0 gauge. I am only going to be running 2 of the 15's wired down to 1 ohm at 2000w RMS. They only have about 3 cubic feet each after displacement. The box is tuned to 34hz. All of my grounds have been sanded down to bare metal. MY QUESTIONS: 1. Should I even use the cap? 2. The clarion has settings for the front and rear with 2 rca inputs. Do I have to run 2 sets of rca's to run both door and rear speakers? I have 2 sets of rca's ran, but I was going to use one for the subs and one for mids and highs. 3. Do you see any thing that could be done better? Uploaded with ImageShack.us

Are you saying put the port on the same side as the subs? Because I can mount them facing up or facing them towards the trunk? This is just temporary until it gets warm and I can wall my accord off Thanks mount em however you want. but on a single sub setup, putting the subs on the narrowest possible side maximizes baffle strength. if you put em on the wideer side (the top in this case) put a 1" dowel top to bottom to strengthen it. Alright, I will put them facing the trunk and I should be able to make the width a little bit wider so I have a little extra room. Btw, I just looked at your build and it looks awesome lol. How did you learn so much about car audio? I've been reading everything I can find about it to help improve my knowledge on it. I'm 16 so this is my first system. i learned doing what you just did and are going to do. reading logs and making my own. I will try to start my build log on Friday once I go pick everything up, but this setup is just temporary until I find a after school job.

Are you saying put the port on the same side as the subs? Because I can mount them facing up or facing them towards the trunk? This is just temporary until it gets warm and I can wall my accord off Thanks mount em however you want. but on a single sub setup, putting the subs on the narrowest possible side maximizes baffle strength. if you put em on the wideer side (the top in this case) put a 1" dowel top to bottom to strengthen it. Alright, I will put them facing the trunk and I should be able to make the width a little bit wider so I have a little extra room. Btw, I just looked at your build and it looks awesome lol. How did you learn so much about car audio? I've been reading everything I can find about it to help improve my knowledge on it. I'm 16 so this is my first system.

Are you saying put the port on the same side as the subs? Because I can mount them facing up or facing them towards the trunk? This is just temporary until it gets warm and I can wall my accord off Thanks

Ok, Sorry I forgot to add in the wood thickness.

You do amazing work. How long have you been messing with car audio?

Does it need to be wider? Why wouldn't it work? This is my first box build.

sorry I mean the width is 38" and Length 26" sorry