gowerryan

I did a system in one of these cars and second skin is the way to go, make sure when doing the SS that you put it in the holes behind the tail lights on the trunk ya man if you could send me some pics that would be sweet and as for deadener idk what brand will be used yet

was just looking at my trunk and seen that the back little board that sistes over the spare tire in the trunk and through the rest of the trunk is all fucked up...but my queston is i have access to cardboard thats like 1/2 thick, you guys think that, that would be a good replacement?i ll carpet it and everything too

thxs man i m planning on having this car for a while so i m going to do a majority of the preliminary things for a big system now so than when i do upgrade it will be alot simpler.....and as for cutting things out thats not a problem for me my dads a sheetmetal mech for american airlines....anytime i start doing something with metal working his skills help out alot and i do have folding seats in mine i just remembered so i ll have to see what all needs to be done

dude sorry to tell ya but you prob won t be able to sell it but bump for you anyways...might just post it on your local craigslist prob can sell it there

i was talking about the second skin b stock man

thxs man looks like some good shit and at that price i might try to get like 50sq-ft and do like everything i possibly can i m trying as cheap as i can for now man might end up putting a whole nother system in later but i want to have everything deadened so if i do i don t have to deal with a bunch of rattle later

where would i get the b stock from?

do not, I repeat, DO NOT use peel and seal. I made the mistake of using it and deeply regret it. It might work all right at first, but then it will start smelling and falling off if it is exposed to any kind of heal. And the stuff is nearly impossible to remove. don t worry i m not going to use peal and seal.....a friend of mine used it and it didn t help him at all and his car still smells like it

i kno i m not going to be super loud....i just want that level where people are surprised that its only one ten.........and whats a good deadener that not ridiculously priced? so no go on expanding foam...whats a good deadener the not crazy expensive?

ya i got i hella cheap runs a lil rough but its either a cloged injector or a new rotor and cap, i got some junk yard injectors to replace them and of corse a new rotor and cap are pretty cheap... but on to the audio.....would i port it through the back deck or just next to the sub, or even though the seat? i d like for it not to interfere with being able to have back passengers if all possible...

well just bought a 5 speed 95 corolla, picked it up for 150 but it needs a clutch and had a lil bit of body damage. i already fixed one of the worst things on the body with a replaced door that was the same color. it does need a new back driver side door, a trunk lid, possible a same color passenger fender but i already have a black one, maybee a hood and front bumper but i don t think it will need them all and if it does i can get them cheap at the local yard. i already got the clutch and paid for it to be put in, and i m planning on doing the timing belt this month sometime. but on to the system i already have a single infinity 100.3 dvc 10inch that is a pretty good little sub a ppi 500.1 amp to run it some where around 250 300 rms, power rf 4 inch door speakers, possible do some other rf speakers and another amp later, i do already have a lot of powerbass items including 1100.5, 300.2x, and some power bass 6x9s i might use but i m not doin anything but the rf speakers and infinity amp. i do have an almost brandnew kenwood deck and all of my wiring also(everything except speaker wire) but what i m trying to do is show people at my school that you don t need to have 2 15s to be loud if u play it smart. i m going to expanding foam the trunk and deaden it and the doors hopefully the roof also but my main concerns our on the box what do you guys think would be the best box designs? i m planing ported but i d like it to be tunable, so would i use a aeroport? or? keep in mind i kno this isn t going to be crazy super ass loud but i think, hope, and pray that it will be decent

ya they were in a vehicle and normally they do but the dumbass that work there never rlly take any time to look closely so i just take a lil bit of time when i m there to look at everything and check

well was just walkin round the u pull yard today lookin for just whatever, and cam across these the newer ones arn t that great but the powers i was real happy about and for 7 bucks a piece not bad either. but what do u guys think?

i feel stupid about putting the thing in mine about testing scores now

don t lump all kids in with this guys....i kno i could answer every question in this video not even thinking about it...and i would expect 99% of kids at my school to be able to also...my school has had some of the highest testing scores in our district in the last couple of years too...i think its just that school it looks alot larger than mine(about 50 kids a graduating class) so that could have something to do with it too

Read rules

those are what i was thinkin......have any experience with emm?

get more RCA's i have 3 sets. 2 sets on front and rear to my t400.4 and 1 set on the t1500.1 no what i sayin is the 1100.5 takes three imputs front back sub but i have a 300.2 i want to use to run a piar of components off of how would i run all of them?

i m thinkin bout tradin ppi 500.1 for a pb1100.5 since the dudes only usin it for his subs anyways but how would i run it with my pb 300.2x.... i have my fron back and sub rca's out puts from my deck but haow would i run both? i ve yet to get my hands on the pb 1100 to see if it has an output but if it doesn t do i just use a equalizer? rca splitters? or what?

just started on this its mine and my dads car so i m not goin crazy just some smaller stuff but idk we will see how it goes new deck in my droid 2 car mount so its right at my finger tips plus ran th aux so it goes right to it no visible wires but after a day or so it just wouldn t stay stuck down...its stuck to the tisue tray thats in the center console under the the lid stickin though the slot so i pulled out the tray cut a piece of stainless got out the contact cement and glued that b**** down works awesome now.... have some more plans but need speaker wire:( i have 2 pairs of 6x9s to go in it right now was thinkin of gettin a pb 1100.5 to go with my 300.2x to run 3 pairs of speakers and some kind of sub stage....but idk yet

what i ve heard about sub break in is that f it let emm bump but idk never rlly put it to the test

heyy wondering if u guys make an alt for a 94 ranger or explorer 4.0 i m doin an engine swap into a 88 bronco but i m going to need a larger alt for when i put a system in wondering if u make one?

ok i figured out the factory remote wire and have that playing but the sound is choppie it won t play though all the speakers sounds like the amps are turning on and off seperately almost like the ohm load is too low or something and its going into protect or something it plays well at low levels but not when the music gets louder

i used a harness and which would be the factory remote?

havin problems with puttin a stereo in with the infinity premium stereo i get power and everything but no sound....wondering if theres any extra amps or somethen like that....that isn t powering on any help its a 2000 dodge caravan