Jump to content

johnarias15

Members
 View Profile  See their activity

  • Posts

    72

  • Joined

  • Last visited

 Content Type 

Everything posted by johnarias15

  1. johnarias15
    46,785
  2. johnarias15
    5178
  3. johnarias15
    Thanks for the help!!!
  4. johnarias15
    Just wondering what kind of solder should I purchase for these 2/0 Lugs?
  5. johnarias15
    Want one if it has a case like the VM-1
  6. johnarias15
    @meade916. It is pretty hard to find a good Line Output Converter out there that puts out a clean signal. Hopefully we could see a D'Amore SMD LOC soon maybe????
  7. johnarias15
    Yes, I have the Scosche LOC-80 and it does have adjustable gain outputs.
  8. johnarias15
    Yes I Did. I just followed MrSkippyJ's instructions and I was able to get the amp tuned perfectly.
  9. johnarias15
    Hi, I've looked throughout the posts but couldn't find what I was looking for. I have a 2010 GMC Sierra with the stock headunit. How do you get the DD-1 to detect a signal from the headunit. I've used the device on other aftermarket stereos which made it work fine. Is it because of my line output converter? Thanks
  10. johnarias15
    Hi, Has anyone ever heard of Mike Jones at Custom Soundworks in Lubbock,TX? Been hearing rumors that he holds the record for the loudest car ever and best installer in the state? Is this true?
  11. johnarias15
    bump
  12. johnarias15
    Here is the sketchup rendering of the box also. http://i1098.photobucket.com/albums/g364/johnarias2012/sundown2sketchup.jpg
  13. johnarias15
    Here is another option. http://s1098.photobucket.com/albums/g364/johnarias2012/?action=view&current=Box.jpg
  14. johnarias15
    I'm running to Digital Designs 508s under the seat firing outward. The box I got for it has dual ports on each side and make them slam pretty hard.
  15. johnarias15
    what about this? http://s1098.photobucket.com/albums/g364/johnarias2012/?action=view&current=Untitled.png
  16. johnarias15
    This past weekend I did build a box that was 12x12x14 with a port opening of 1.5" The port ran towards the back 9.625" and went to the right 6.25". It did sound awful so I want to get this second one right.
  17. johnarias15
    so would that be 10" back, 10" right, 10" to the front on the port?
  18. johnarias15
    I was looking around 25-30 hz. I was also if the port opening is smaller does that mean a lower frequency?
  19. johnarias15
    Could the measurements for the box be 12x12x14?
  20. johnarias15
    I will have to give you the measurements when I get the truck back tomorrow as it is in the shop. It is nearly impossible though to have the sub sit underneath the seat and the seats can't fold since they are bolted to the back of the truck so behind the seats is out of the question.
  21. johnarias15
    I'm going to have it powered by a Crossfire C3 501. 500 watts rms on a 1 ohm load
  22. johnarias15
    I'm putting it in a 2005 ford f150 crew cab. Since the seats sit so low I decided just to put it in the center seat of the back seat with the sub facing forward.
  23. johnarias15
    Hi, I just became a proud owner of a Sundown Audio v2 8". Ive been doing some research and found out that the sub only needs .75 cu ft of space. What is the size of the port going to be for this sub. Also the dimensions of the box would be needed. Sorry for being a noob at box building. Thanks.
  24. johnarias15
    I wanted to do that but the box is bolted to the body of the truck. I will more than likely get him to run new power and ground
  25. johnarias15
    That's what I'm thinking. In my truck I'm running 2 gauge
×
×
  • Create New...