slmd95s10

any updates?

ive heard the same, not very good if your lookin to get loud...i know from experience. i used to run 2 13ov.2's which were there top line 12's and they were crap!

looking at maybe buying 4 lvl2 15's but was wondering what the prices on these are and where can i get them? thanks!

you think the alt bracket would also work on a 03' Avalanche w/5.3L? if so let me know, i'll take one when you get them made up.

loud and clean

anyone know what i should be aiming for as far as tuning and volume on a ported box? ive been playin with a few calculators and i seem to come up with roughly 6cuFt at 34Hz but not really sure how it will sound. according to RE's specs the volume should be 8cuFt total. will this affect the output of my subs if its tuned right but not large enough?

I love it when people tell me how to do shit on my own truck! especially when they have absolutely no clue as to what is going on at all.

would it be better for me to just go with a ported box built to RE's specs? it will be powered by a US Amps xt-4000D so roughly 1200-1500 RMS to both subs.

well my size constraints are roughly 49.5 wide by 19.5 tall. depth is not a concern since it will be in the "bed" of the avalanche.

i am trying to design my box for 2 RE 15SE's and what i have come up with is essentially a sealed box with the subs facing up firing into a port which will be facing forward. make sense to anyone? now would i be able to just allow any amount of space for this so-called port or would it be the same as a ported enclosure and have to be tuned to a given frequency? it will be going into an 03 chevy avalanche btw.

dangit!!! hmmm maybe its time for a bigger amp to run these. i love the sound i would just like them to be a little louder without distortion issues.

will i lose my left to right adjustability if i wire them in parallel?

who makes a 2ohm component set??

how can i run my 4ohm components at 2ohms to get better power from my amp? comps are CDT EF-61fg's powered by USAmps XT800.4