But my box I bought has terminals on each side for each sub. So its impossible for me to run wires from one sub to another through the box. The way my box is made, I'll be having two possitve and two negative wires coming from the box
I have two 2ohm dvc subs. I bought a 2channel amp for them. If I'm correct, when wiring in series you divide the ohm by 2 and when wiring in parallel you multiply the ohm by 2? Correct? I just want to keep the 2ohm load, so how should I wire them?
This box was $30, if I made my own, I'd spend more than $30.... I just wondering if the size of box would suit the subs ok. I'm going to make my own box in the future I just wanted something now. Sooo is 1 cubic ft ok for each sub?
So the Pioneers would sound worse than the MB Quarts if their both hooked too an amp since the pioneers put out more watts?
MBQuarts- 3rd to top of the line speaker MB Quart makes
Peak: 200 watts per pair / 100 watts each
RMS: 100 watts per pair / 50 watts each
Pioneers- top of the line speaker Pioneer makes
Peak: 520 watts per pair / 260 watts each
RMS: 120 watts per pair /60 watts each
I don't have the bass way up there. Maybe like on level 2 and when I turn up the volume, it starts to distort. The Pioneer D series power ratings are more than the MB Quart's. So I thought the Pioneers could handle more power to them and wouldn't distort as much. I'm just looking for some clear/loud decent mids/ highs. I'm not worried about bass right now.